Roll crusher can be referred to as compression-type crushers. In the mining industry, they are used to crush mines of medium or low hardness, rocks that have low or medium rigidity during mine selection, for cement, chemicals, and industrial production of building materials, among others. Its effect is more excellent than common crushing equipment.
       The Double Roll Crusher incorporates one Stationary Roll and one Moveable Roll. The Movable Roll provides relief by moving away from  the Stationary Roll when uncrushable material is encountered and immediately resets to the original position. Roll diameters range from 18" to 76" and roll widths up to 120".
       Theoretically speaking, the maximum reduction ratio of roll crushers is 4:1. For example, the smallest size that can be recognized by a particle of 2inches is 1/2 an inch. Using this machine, a material is crushed and reduced to a minimum particle size of 10Mesh (2mm). The materials are crushed by compression between two rolls rotating about a shaft. The size between the two rolls used for compression can be suitably adjusted according to the desired size of the end-product. It is important to note that the largest particle size of the materials inserted should not be more than four times the dimension of the gap.
       The rotation of the two rolls draws the particles to be crushed into the gap forming a friction angle between the rolls and particles referred to as nip angle. Through forcing the materials between the gaps, the rolls create compressive forces causing the materials to fracture.
         Roll crusher has the advantage of producing an end-product that is has a fine size distribution and they produce little dust or fines during operation. It is widely used for crushing minerals whose abrasive levels are low and in the small scale production of mine. Roll crushers are mostly used during coal mining. The crushers used may either be single roll or double roll. When used in coal mining, the surface of the rolls will have teeth or raised forms (when used for mineral and metal ores, the rolls have a smooth surface). 
        We can provide you with not only the roller crusher and all of accessories, but also type selection introduction and installation guidance, etc.
         If you want to know more detailed information about our products, please feel free to contact us at any time!