iron mining flotation machine / professional SF flotation machine / SF flotation machine

I. Introduction Of Flotation Machine :

Flotation machine products is applicable for separating non-ferrous metal, black metal, noble metal, non-metal mineral, raw body and materials of chemical industry,
which are subject to coarse separation, swept separation, fine separation and
floatation, so the useful ore are reclaimed. 

Flotation machine is effectively applied to involving the separation of colored black metal and non-metallic such as: Coal fluorite, talc. The flotation machine by motor triangle generation transmission to drive the impeller rotation, produce centrifugal action form negative pressure. On the one hand suction enough air to pulp mixing, on the one hand, stirring pulp and drug combinations, and at the same time refining bubble, make mineral adhesive foam on, floating to the pulp surface reformulation mineralization foam. Adjust disc height, control level, make useful foam was scraper scrape. 

 

 

II. Features Of Floatation Machine :

1. The Floatation Machine Products has the advantages of large air-absorption capacity and low energy consumption. 
2. Every cell owns three functions: 
Air absorption, slurry absorption, and floatation separation 
3. The cells form a floatation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow. 
4. The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent. 
5. There is self-control device on the surface of mineral slurry, so it is easy to adjust it. 
6. The impeller has backward-inclined upper and lower vanes, which produce upper and lower circulation of mineral slurrry respectively. 

 

 
III. Working Principle Of Flotation Machine :

1. Flotation machine products is applicable for the separation of nonferrous metal and ferrous metals, such as fluorite and talc. 
2. The impeller is driven by V-belts, which can bring the centrifugal effect to form negative pressure. 
3. While extracting sufficient air to mix with ore pulp, the machine stirs ore pulp and mixes it with chemicals to form mineralized froth. 
4. By adjusting the height of the flash board to control the liquid level, the useful froth can be scraped from the loam board. 
5. The height of the strobe must be adjusted carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder. 
6. The impellers and stators should be kept at a distance and should be changed when worn. 
7. The bearing in the pump should be maintained every three months.

 

Type	Cubage (m3)	Diameter of  impellor(mm)	Capacity(m3/min)	Speed of impellor (r/min)	Motor of impellor	Weight  (t/cell)
XJK-0.13	0.13	200	0.05-0.16	600	Y90L-4-1.5	0.23
XJK-0.23	0.23	250	0.12-0.28	500	Y90L-4-1.5	0.35
XJK-0.35	0.35	300	0.18-0.4	470	Y90L-4-1.5	0.43
XJK-0.62	0.62	350	0.3-0.9	400	Y100L-4-3	0.86
XJK-1.1	1.1	500	0.6-1.6	330	Y100M-4-5.5	1.38
XJK-2.8	2.8	600	1.5-3.5	280	Y100M-4-11	2.33
XJK-5.8	1.1	750	3-7	240	Y100M-4-22	3.533

Model		SF0.37	SF0.7	SF1.2	SF2.8	SF4
Trough capacity(m3)		0.37	0.7	1.2	2.8	4
Blade diameter(mm)		300	350	450	550	650
Production capacity(m3/min)		0.2-0.4	0.3-0.9	0.6-1.2	1.5-3.5	0.5-4
Blade rotation speed(m3/min)		352	400	312	268	238
Motor	Model	Y90L-4	Y100L2-4	Y132M2-6	Y160L-6	Y180L-6
		Y90S-4	Y90S-4	Y90S-4	Y90S-4	Y90L-4
	Power(kw)	1.5	3	5.5	11	15
		1.1	1.1	1.1	1.1	1.5
Dimensions(mm)		700*700 *750	900*820 *950	1100*1100 *1100	1700*1600 *1150	1850*2050 *1200
Single trough weight(kg)		468	600	1373	2338	2660

 

  If you have any requirement, please don’t hesitate to contact us.