Product Main

Specifications


Product Description

Led T8 Tube 1.5M 20W

1.Model: TPL-T81.5M-20W
2.CE&ROHS certification
3.3years warranty

Technical Specifications:

Product Parameter
Dimension:diameter26*L1512mm
LED Quantity:45pcs high power LED, 0.5w each
LED Chip:Epistar or BridgeLux
Power:20W
Lifespan:50,000hours
Housing:Pure Aluminum and PC
Equivalent:replace 60w traditional fluorescent tube
Power Efficiency:More than95%
Input Voltage:AC85-265V
Beam Angle:180 degree
Luminous Efficiency:100-110lm/w
Luminous Flux:2000-2200lm
Color Rendering Index(CRI):more than80Ra
Working Temperature:-20°C~56°C
Color Temperature:2700-3200K
4000-4500K
5000-6500K

Storage temperature: -30 to 60°C
Working humidity: 30% to 85%
Storage humidity: 10% to 90%
Product Feature
Features of T8 LED Light Tube:
1.Easy installation, direct replacement of traditional fluorescent tube, no need ballast or starter
2.Adopt high power 0.5w LED as light source, better for heat dissipation, high brightness, low light degradation


Energy saving T8 LED light tube:

T8 LED Tube Equivalent Traditional fluorescent tube
60CM-8W 60CM-20W
90CM-12W 90CM-30W
120CM-16W 120CM-40W
150CM-20W 150CM-60W
3.High quality Aluminum and PC to ensure the quality and heat diffuser
4.Energy saving and long lifespan, can save maintenance cost
5.High luminous efficiency up to 100-110lm/w
6.Frosted cover and transparent cover are available
7.Rotating plastic end caps, convenient for installation
8.Different size available 600mm 900mm 1200mm 1500mm
Product Specification/Models
T8 LED Tube Light Installation Instruction:Step 1Find out what your light fixture type is? There are two types, one using magnetic (inductive) ballast, let us call it MAGNETIC BALLAST TYPE. The other one using Electronic ballast. Let us call it ELECTRONIC BALLAST TYPE.The easiest way to tell which light fixture you have is by looking for a 'starter' The MAGNETIC BALLAST TYPE has 'starter' while the ELECTRONIC BALLAST TYPE does not.
Step 2Turn power off before installation. Wiring the fixture to use the LED tubes is simple, but should be performed by a qualified person.For MAGNETIC BALLAST TYPE, only remove the starter from light fixture; do not need to remove ballast. Also you can remove starter and ballast if it is convenient.For ELECTRONIC BALLAST TYPE, remove/bypass the electronic ballast from light fixture. Do not install the LED tube without removing/bypassing the electronic ballast as damage to the LED tube may occur.
Step 3Install T8 LED tube light to the light fixture. Turn power on.Show you in Sketch
(a) ELECTRONIC BALLAST TYPE, Electronic ballast removed/bypassedThe two pins at each end of the LED tube are connected together. Simply apply one side of the 120 Volts (or 220 Volts) AC to one end of the tube (either pin) and the other side of the 120 Volts (or 220 Volts) AC to the other end. Power can be applied to either pin.
(b) MAGNETIC BALLAST TYPE, Starter removed(c) MAGNETIC BALLAST TYPE, Starter and ballast removed Notes: Safety First!- All electrical work should be undertaken by an electrician who is fully qualified and registered. When installing LED Tubes please ensure that appropriate health and safety precautions are taken, including ensuring that the light fixture is properly isolated before commencing work.Under no conditions: DO NOT connect power (positive & negative) to the two pins at one end only. If they are connected together (positive/negative): you will create a short circuit!Installation of LED Tubes to a fitting that has not been modified in accordance with the above instructions will result in damage/Failure of the tube. Incorrect modification of the fitting may also result in damage/failure of the tube. Either of the above will invalidate the warranty.

Applications
1.Workshop and warehouse
Compared with the traditional lamps, LED tube would be better to protect the employees' eyes and body. 2.Supermarket&Department Store(especially in freezers)
3.School&office
Safe and reliable, no flicker, the light is soft and pure, effectively relieve eye fatigue, no UV and no damage to human skin.
4. Hospital, municipal building, square and other places.
Other Information

Guarantee
1. 12 months Manufacturer's limited warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
2. Defective items MUST BE reported and returned within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH EXPIRED WARRANTY.
You agree to all of the above-listed policies upon ordering on aliexpress!

Feedback
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Our Service1)Your inquiry related to our products or prices will be replied in 24hours.2)Well-trained and experienced staffs to answer all your inquires in fluent English3)OEM and ODM,any your customized lightings we can help you design put into product4)Distribute ownership are offered for your unique design and some our current models5)Protection of your sales area,ideas of design and all your private information.