Electrical Potting silicones application

 

Electrical Potting silicones is good used for LED display, pixel tube for potting;

Electrical Potting silicones is application for DC/DC module and circuit board which requires heat dissipation and high temperature resistance.

Electrical Potting silicones can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.

Electrical Potting silicones Features

Electrical Potting silicones has sticky viscosity, low shrinkage and non-corrosive.

The Electrical Potting and Encapsulating Compounds can be used for a long period at the temperature of -60~300 centigrade degree with the characteristics of moisture-proof and waterproof, radiation-proof as well as weatherable and anti-ageing.

 

 

Electrical Potting silicones operation instruction

1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.

2, Mixing Ratio: part A: part B = 1:1

3, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes. Then the mixture could be used for pouring.

Electrical Potting silicones operation attentions

 

Pls note that the thickness of the silicone affects the curing time. If the silicone used is a little thick, then the curing time will be a little longer. The temperature also affects the curing time. When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80~100° C, the silicone will cure in 15 minutes; while in 25° C room temperature, the silicone will cure around 8 hours.

 

1. Free sample is avalible

2. Reach certificate is avalible

3. MSDS, RHOS, GSG are avalible

4. 1kg/tin, 5kg/tin are avalible

For more information about High quality silicone rubber compound for electronic potting, pls feel free to contact Ms. Christy.