SF Flotation Machine : Introduction

 

The SF Flotation Machine is used for separating ferrous and non-ferrous metals. It can be also used for separation of non-metaI materials such as coaI fluorite and steatite. The impelIer rotates by triangIe belt of the motor, whih produces centrifugal function and causes negative pressure. 0n one hand the SF Flotation Machine draws in enough air mixed with ore magma; on the other hand it agitates to mix ore magma with chemicaI medicines. At the same time, the SF Flotation Machine minifies bubbles so that minerals can stick above them, float on the su- rface of magma, and form mineralized bubbles. The height of plate can be adjusted to control fluid Ievel so that the avaIlable bubbles can be scrapped out by scrapers.

SF Flotation Machine : Working Principle Description

When in application, the impeller is revolved by the motor in order to produce centrifugal forces and negative pressure. Air is then absorbed to mix with the ore pulp (slurry). The copper ore pulp is stirred and mixed with chemical additives, which results in the formation of mineralized froth on the surface of the slurry. The liquid level can be carefully adjusted by altering the height of the flash board.

 

SF Flotation Machine : Application Area

 

The SF Flotation Machine can be effectively applied for applications involving the separation of ferrous and non ferrous metal such as fluorite and talc. The machine has an impeller which works to create centrifugal forces in the form of negative pressure. The SF Flotation Machine impellers and stators should be kept at a distance and replacement done as soon as they get worn. The pump bearings should be maintained every three months. The SF Flotation Machine can be used in mining, metallurgical industry, construction, road and railway building, conversancy, chemistry, etc.

 

Welcome to our company!

 

If you have any requirement or questions about the SF Flotation Machine,

 

please don’ t hesitate to contact us.