Gasboard—3100 infrared syngas analyzer Based on the NDIR and Thermal Conductivity Detector and can be used for measurement of the concentration of up to 6 gases such as CO, CO2, CH4, CnHm, H2 and O2 , also calculated heating value(caloric value )automatically.
Measure Gas |
Measure Method |
Measure Range |
Resolution |
Precision |
Error |
CO |
NDIR |
25% |
0. 01% |
≤2% FS |
≤2% |
CO2 |
NDIR |
50% |
0. 01% |
≤2% FS |
≤2% |
CH4 |
NDIR |
10% |
0.01% |
≤2% FS |
≤2% |
H2 |
TCD |
10% |
0.0 1% |
≤3% FS |
≤2% |
O2 |
ECD |
25% |
0.01% |
≤3% FS |
≤2% |
Note: Measurement range can be customized by the requirement. |
|
|
Gas flow |
0.7 ~ 1.2 L/min |
Pressure of gas inlet |
<1Bar |
Sampling gas requirement |
Remove water vapor, dust(<1um) and oil etc. |
Response Time |
<15s (NDIR) |
Warm-up time |
15min |
Communication port |
RS232(optional) |
Output |
4~20 mA(according to the requirement) |
|
|
Work temperature |
0~50℃ |
Relative humidity |
5~85% |
Ambient air pressure |
86~108kPa |
Power supply |
220V±44V AC 50Hz±1Hz |
Dimension |
483mm×373mm×140mm(W×L×H) |
Weight |
12kg |
|