Product Main

Specifications

Product Introduction
 
Duct Rodder applies in tow leadrope through a pipe, it is auxiliary means. Surface smooth and high resilience, so the FRP
perforator with ease passes the narrow channel. Perforator consists of two parts: the glass fiber strengthen the level, the
high-pressured low density polyethylene protective layer(smooth, firm , can resist the adverse circumstance). It has time
saving reducing effort, improving efficiency, etc.
 
And can be used for telecom cables, cable pipe and cleaning and plastic pipe of cloths to put. When use draws out the FPR
pole by the pulley, then with a corresponding metal joint, penetrates in the pipeline. When cleaning, guidehead will drive
cleaning tools to clean the pipe; When arranges the cable, you may first leads the steel wire or the iron wire, then enters the
pipe with the steel wire or the iron wire hauling cable.
 
A. The Fiberglass duct rod type
Dia from 4.5mm to 18mm. The longth of fiberglass rod from 50 meter to 350meter
 
B. Duct rodders/rods features
 
1. Strong non-conductive fiberglass rod construction
2. Stainless steel drawing head
3. For longer conduit runs and underground duct
4. Rugged tubular steel reel with adjustable position.
5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod.
6. Duct rods/duct rodders have Many applications, not only pulling the cable but also pulling electric tools, and it repair is
very easy, and available.
 
C. Specifications
 
Technical Date of Fiberglass Duct Rodder
Specification
Rod Diameter (mm)
Φ 4,Φ 5,Φ 6,Φ 8,Φ 10, Φ 11, Φ 12, Φ 13, Φ 14, Φ 15, Φ 16
Rod Length (m)
30m~350m
Frame Spec. (mm)
1300x450x1330,1200x420x1220,980x350x1000,680x240x700,420x180x400
Material:
Fiber glass rod inner,
Extruded by fiber glass and high strength resin at high temperature
Fiber glass rod outer
High Density polyethylene coating
Metal Frame
Steel with high-temperature sprayed plastic or hot dip galvanized
Physical Property
Fiber glass content
75-80%
Density
> 1.9gr/cm3
Working environment
-40° C to +80° C
Minimum Pulling strength
4000N +/-5%
Consistency of rod
137gr/m
Flexural Modulus
> 46.500Mpa
Elongation at break
2.5-3%
Min Bending Radius
388mm