Condensation Electronic Potting Silicone Rubber

 

Features & Applications of product

HY 210 is condensation silicone potting compound in two parts with low viscosity.

It can be cured completely at room temperature. HY 210 works on the surface of material as PC(Poly-carbonate), PP, ABS, PVC as to its superior bonding feature. It is also applicable for insulation, waterproof and bonding of electronics parts. It meets the requirements of European RoHS.

Typical Application
- Potting for Protetion of general electronic Module.

- Outdoor protection for LED screen.

TECHNICAL GUIDELINES

1, Please put part A and part B in separate container and stir evenly before mixing the two parts together.

2, Weight Ratio: part A: part B = 10:1

3, Bubble release if necessary. Deaeration the mixture under 0.08 MPa for 3 minutes.

4, HY 210 is cured at room temperature, so pls put it under room temperature after pouring. It comes to next process when basically cured, and it takes about 24 hours for completely cured.

Kindly note: Temperature and Humidity with a tremendous influences for curing of HY 210. PACKAGE
HY 210: 22Kg/set (Part A 20Kg + Part B 2Kg)