Product Main

Specifications

Stone Crusher-jaw crusher
 
Advantages:

1, large crushing ratio, uniform particle size.
2, easy to replace parts, maintenance, small amount of work.
3, simple structure, reliable operation and low cost .
4, low noise, less dust.
5, nesting population adjustment range, can meet different user requirements;
 
Product Description:

PE Jaw Crusher is our company set the successful experience in similar products at
home and abroad, for mining, smelting, building material, highway, railway, water
conservancy, road construction and other industrial sectors quarries and rock crusher
specially designed. The product specification is complete, the feed size from 80-850
mm, PE-type jaw crusher crushing materials of compressive strength of up to 300Mpa,
is a complete set of broken lines in the first choice of primary crushing equipment.
 
Working principle of Stone Crusher:
The motor transmits power through belt, drives the moving jaw to do periodic motion
towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving
jaw plate increases when moving jaw moves. So the moving jaw moves towards the fixed
jaw. The stuff will be crushed in this process. The angle between toggle plate and moving
jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by
pulling rod and spring, the final crushed stuff will be discharged from the outlet.
 
Jaw Crusher Note:

The aircraft should be checked before use each part of fasteners, particularly bolts
lubricated parts and ministries, all lubricated parts need to maintain sufficient oil, will be
fastening bolts loose, and then clean up broken cavity residue, and then start production
of in normal work, note that even under the material may not be under a foot, for a long
time without adding, too much can cause mechanical blockage. Jaw movement and
static jaw plates, side panels, roof of wearing parts, taking care to maintain!
 
Main Technology Parameter:
 
Model
Feed
Opening
Size
(mm)
Max
Feed
Size
(mm)
Capacity
(m³ /h)
Motor
Power
(kw)
Adjustment
Range of
Discharge
Opening(mm)
Eccentric
Shaft
Speed
(r/min)
Weight (t)
PEX100× 600
100× 600
80
2-8
7.5
7-21
330
1
PEX150× 750
150× 750
120
5-16
15
18-48
320
3.5
PEX250× 750
250× 750
210
8-22
22
25-60
330
4.9
PEX250× 1000
250× 1000
210
10-32
30
25-60
330
6.5
PEX250× 1200
250× 1200
210
13-42
37
25-60
330
7.7
PEX350× 700
350× 700
300
16-35
30
30-80
300
6.5
PEX300× 1300
300× 1300
250
15-55
75
30-80
300
11
PE150× 250
150× 250
125
0.6-3
5.5
10-40
300
1
PE250× 400
250× 400
210
3-13
15
20-60
300
2.8
PE400× 600
400× 600
340
10-34
30
40-100
275
6.5
PE500× 750
500× 750
425
20-52
55
50-100
275
10.5
PE600× 900
600× 900
500
30-75
55
65-160
250
15.5
PE750× 1060
750× 1060
630
72-130
110
80-160
250
28
PE870× 1060
870× 1060
670
160-210
110
200-260
250
30.5
PE900× 1200
900× 1200
750
90-190
132-160
95-180
200
50
PE1000× 1200
1000× 1200
850
197-214
132-160
230-265
200
51
PE1200× 1500
1200× 1500
950
188-500
160-250
150-350
180
100.9
PE1400× 1800
1400× 1800
1100
288-480
250-315
500-1100
180
120