The drawer style HG/T21586 demister pad is mainly composed of rectangular bar type screen that made of wire mesh and wire mesh grille instead of the original circular network block, when using in the outside of the tower body only needs to be set 1 to N demolition mouth, the stripe screen block can be directly insert along the rail insert (maintenance). Its selection of the nominal diameter range has 56 kinds of DN300mm ~ DN5000mm.
HG/T21586 wire mesh demister mark method
Mark example:
HG/T21586 11- 98 WME-1000-100 316L/Q235 it means that the wire mesh with 316L, Grille Q235-A diameter of 1000mm, height 100mm drawer-type demister pad.
Mark example:
HG/T21586 11- 98 WME-1000-100 316L/Q235 it means that the wire mesh with 316L, Grille Q235-A diameter of 1000mm, height 100mm drawer-type demister pad.
Drawer wire demister has the following advantages
- Do not have to enter the tower to be cleaned, repaired or replaced.
- Easy clean-up, long life, stable results.
- Short maintenance time, low cost, simple structure, less investment.
- Setting the blind plate can quickly adapt to the low-load operation, to improve the ability to adapt and expand the range of applications.
Usage of drawer demister pad
Drawer-type demister pad applies to the occasions that need for frequent cleaning or replacement demister element, such as sulfuric acid drying tower and absorber device. Its selection of the nominal diameter range has 56 kinds of DN300mm ~ DN 5000mm. When ordering simply provide a figure number and choice of materials (including 316L, NS-80 and RS-2 sulfuric acid plant commonly used in wire mesh material).
Drawer-type demister pad applies to the occasions that need for frequent cleaning or replacement demister element, such as sulfuric acid drying tower and absorber device. Its selection of the nominal diameter range has 56 kinds of DN300mm ~ DN 5000mm. When ordering simply provide a figure number and choice of materials (including 316L, NS-80 and RS-2 sulfuric acid plant commonly used in wire mesh material).