YAG Laser Cutting Machine for Stainless Steel

Main Features :

1.  Gantry structure
1)  Gantry framework: Welded with metal plates. It is heavy and resistant to deformation with high precision.
2)  Laser head moves within various cutting field and the focused beam diameters are same at any locations and thus the cutting edge is also same at any locations.
2.  Convenient to align the optical route and replace lamp & rod
Just move the laser head to the edge of the table. The operator can stand by the side of the table to make adjustment, repair & replacement.
3. Safe & convenient to load/unload the workpiece.
It is convenient to load or unload the workpiece since the table is at reasonable height.
4.  Unique laser cutting head
The focused beam is always kept at the focus since a self-floating laser cutting head is used. The distance between the cutting nozzle and metal surface is automatically kept unchanged whether the surface is flat, curvature or rough. The height of the nozzle to the metal surface will automatically change according to the metal .
5.  Multifunction
The maximum 1.5x3m metal sheets can be easily cut. Furthermore metal tubes can be cut using a rotary table.
6.  Easy transportation and installation
The whole machine can be easily shipped at package. Also the machine can be installed by the users according to our detailed operation manuals.

Technical Parameters:

Model	CY-Y1325
Max. average laser output	600W
Laser wavelength	1,064nm
Pulse width	0.2~20ms, Continuously Adjustable
Pulse frequency	0.1~500Hz, Continuously Adjustable
Energy instability degree	≤5%
Continuous operating time	≥20 hours
Worktable precision	±0.1mm(within 2500mm×1300mm)
Max processing area	3000mm×1500mm
Power supply	Triphase Four-wire AC380V, 50Hz, ≤20KVA
Software	Software has the functions of selective location cutting
Air pressure	compressed air, 0.7PA

Configuration of YAG laser cutting machine:

 

 

 

Cutting Parameter: