Industrial sand making machine / rock sand making machine / small sand making machine
Sand Making Machine Advantages
Sand Making Machine Advantages
1. With alloy blade in hammer, extend the useful life.
2. Lubricant system, solve the lock problemof main shaft.
3. With the feed channel, organizable, adjustable.
4. Automatic-lift cover, easy maintenance.
Sand Making Machine Introduction
sand making machine is the advanced, the third generation and the forth generation machine, onlyone machine has the capability of crushing and milling together, can process all most hard, high-wear and sticky materials, the structure of the machine is original, stable operation, high capacity, little cost and pollution, easy maintenance.
Sand making machine has the priority capability of making stone good form, all the end product can been formed below 5% content of the chip, the grain is better than the impact crusher.
Sand making machine makes use of the technology of the `no contacting and disparting crushing principle, and develops the special wear materials, makes the cost of the quick wear parts low., And adjusts the structure of the machine according to the clients requirement of the end product of hardness, capacity, size and rate. The machine has been used widely in the field of the water power, highway, architect, cement, silicon and ore sand industry.
Sand Making Machine Working Principle
sand making machine is mainly consistent of feed tube, impeller, and distribution cone. During operation, its two motors drive the impeller to turn round. The speed of impeller will arrive at 75 meter/second. Therefore, as one part of the materials are divided by the feed tube and directly entering into the rotating impeller, they will fly away from the three runner plates of the impeller. The materials will impact with some materials falling around classifier, then impact on the whirlpool cavity' s scale board together, then will be rebounded and impact on the top of whirlpool cavity, then changes its direction and goes down, forms continual material layers with the materials shot from the impeller.
Application Range
1. Sand making machine is used for Pebble, rock( the limestone, granite, basalt, aluminum, andesite, etc. ), ore tailings, attle artificial sand production.
2. Sand making machine has been used in Building aggregate, highway, cushion, asphalt concrete and cement aggregate production.
3. Sand making production and stone reshaping production in water conservancy and hydropower engineering field, highway, railway, bridge, passenger line, air new generation sand making machine port runway, municipal engineering and high-rise buildings.
4. The grinding anterior finely process of mining areas. Building materials, mining, metallurgy, chemical industry, cement, abrasive, refractory material, etc.
5. The crush of high abrasive materials resistance and secondary disassembly, desulphuration of thermal power and metallurgy, slag and construction waste.
6. The production of glass, quartz sand and other high purity material.
The specifications of Sand making Machine :
Model
|
Impeller Speed
(r/min)
|
Max Feeding
(mm)
|
Processing Capacity
(t/h)
|
Motor Power
(kw)
|
Weight
(Excluding Motor)
(t)
|
Overall Dimensions
(LxWxH)
(mm)
|
PCL-600
|
2000-2470
|
30
|
20-35
|
45-75
|
5.6
|
2800x1500x2030
|
PCL-750
|
1500-2045
|
35
|
35-55
|
75-110
|
7.3
|
3300x1800x2440
|
PCL-900
|
1200-1685
|
40
|
55-100
|
110-180
|
12.1
|
3750x2120x2660
|
PCL-1050
|
1000-1430
|
45
|
90-160
|
180-280
|
16.9
|
4480x2450x2906
|
PCL- 1250
|
850-1300
|
45
|
160-230
|
280-380
|
22
|
4563x2650x3716
|
PCL-1350
|
800-1185
|
50
|
200-260
|
320-440
|
26
|
5340x2940x3650
|