Model item: AX052
1. Lock size: 128x105x35mm
2. Finishing: zinc plated
3. 2mm thickness iron of lock body, 1.5mm thickness iron of cap and strike
4. Single brass cylinder,polishing
5. Single brass latch bolt, polishing
6. Unlock when 12V DC power on, 3A
7. With double high temperature-resistant copper coil, 0.5mm cables
8. Standard 3 brass keys, nickel plated
9. Operating time: 0.5s
10. Door thickness: 35mm~60mm
11. Universal for left and right
12. Authority certification: CE, FCC, RoHS approved
13. Quality guarantee: 12 months
This lock is a closing device for inward opening motorised gate installations which have a control panel with a connector for an electric lock of 17Vdc(12Vac)
Instalation
Preparation for gate of over 60mm thick
The lock is equipped with a cylinder tube which can be mounted in gates of 60mm thick.For installation in a thicker gate (up to 100mm),install the supplied extension kit.
Attachment in the gate
1.Choose the installation position.It can be installed vertically or horizontally.
2.Mark the assembly position
(1).The orifice for the cylinder must be 60mm from the edge of the gate
(2).The separation between the electric lock case and bolt case must be 4mm.
3.Attach the electric lock and the bolt lock case to the gate using the supplied screws.In the case of vertical attachment on the ground ,the locking devices for the ground must be acquired separately.