YZ-96 Instruction of mini egg incubator:
----Capacity of incubators for eggs
|
Model
|
Difference
|
Capacity
|
Size
|
Weight
|
|
YZ-96A
|
No control humidity
|
96 eggs
|
52*53*34 CM
|
7.8 KG
|
|
YZ-96B
|
Can control humidity
|
96 eggs
|
52*53*40 CM
|
7.8 KG
|
----MOQ: 1set
----Voltage: 12V/110V/220V,50-60Hz
----Delivery: 2-4 days after receiving order
----Package: the incubator are packed in one carton with foam inside two mini incubator one package
----Material: PC and ABS
Features of egg incubator
Energy can be electricity
Energy-saving and environment protection
Mirco-computer controlled on temperature & humidity
Automatic egg turning, automatic alarm on temperature &humidity
Easy to install, saving human resource and budget to maximize your profit
Egg incubator factory settings
1)Reference temperature:38 2)Reference humidity:60% RH; 3)Cycle of egg-turning:90-minute;
4)Time of egg-turning: 180 seconds; 5)Ventilation cycle: 120 minutes; 6)Ventilation time: 30 seconds
Packaging of egg incubator:
Foam protection
Incubator
Power cord
Instruction booklet
KEY of egg incubator:
1. Testing your unit for the first time.
2. Setting the temperature.
3. Temperature alarm parameter settings (AL and AH)
4. Humidity alarm parameter settings (AS)
5. Calibrating temperature sensor reading (CA)
6. Temperature Upper and lower limit set (HS and LS)
1. Testing egg incubator for the first time:
1.1 Connect the egg turner plug to the control plug inside the egg compartment.
1.2 Connect the provided power supply to the back of the unit and your power source.
1.3 Switch on your power source.
1.4 Switch your unit on.
1.5 You will hear an alarm sounding due to low temperature/humidity.
1.6 Press any of the green buttons to cancel the alarm.
2. Setting the temperature of egg incubator
2.1 Push “SET” once.
2.2 Push “+” or “-“ to select the desired temperature.
2.3 Push “SET” once more to exit.
- These incubators are factory set at 38oC, I found the chicks hatch at day 19 to
20 meaning the temperature being to high. Using the method as described
above. I recommend you set the temperature at 37.6oC.
3. Temperature alarm parameter settings (AL and AH)
The temperature alarm is factory set to sound at 1oC over or below the set temperature.
This is sufficient and you do not need to make any changes to these settings.
3.1 Low temperature alarm parameter setting. (AL)
3.1.1 Press and hold “SETT” for 3 sec.
3.1.2 Push “+” or “-“ until code “AL” appears in the temperature screen.
3.1.3 Push “SET”
3.1.4 Push “+” or “-“ to adjust to your desired lower alarm setting.
4. Temperature Upper and lower limit set (HS and LS)
HS - (High Set) and LS - (Low Set) set the limit of the setting range of the desired temperature setting
(incubating temperature adjustment)
If HS is set as 38.2 and LS is set as 37.4, then the desire temperature (incubating temperature adjustment)
can only be changed from 38.2 to 37.4.
Tips of egg incubator
Egg and incubator hygiene
Proper hygiene is essential to achieve good hatching results. Poor hygiene causes chicks to die in their first 10 days of life.
Only clean eggs should be used for incubation. Dirty eggs are potential carriers of diseases that thrive and multiply in the
ideal heat and moisture conditions of the incubator. If you need to incubate dirty eggs, wash them first in warm water (4449oC)
that contains disinfectant at a rate recommended by the manufacturer (most household disinfectants are suitable),
and dry the eggs quickly after washing using separate paper towels.
Collection and storage of hatching eggs
|
Dry bulb
|
Wet-bulb reading
|
||
|
60% relative humidity
|
70% relative humidity
|
80% relative humidity
|
|
|
°C
|
°C
|
°C
|
°C
|
|
10
|
6.8
|
7.4
|
8.2
|
|
11.1
|
7.6
|
8.3
|
9.3
|
|
12.2
|
8.4
|
9.4
|
10.5
|
|
13.3
|
9.6
|
10.6
|
11.4
|
|
14.3
|
10.7
|
11.5
|
12.1
|
|
15.3
|
11.5
|
12.2
|
13.3
|