Four-roller Rolling Machine

Performance and features:
This machine structure form four on Thomas type, Thomas, also can give priority to drive up and down while driving, Thomas powered by hydraulic motor for coiling sheet provides torque; Thomas under vertical lifting movement by hydraulic cylinder, the hydraulic oil role within in the acquisition, so that clamping plank, for hydraulic transmission; Both sides of the next Thomas has side rails along the frame for Thomas and, through hydraulic transmission arc movement; The machine a bit is plank end pre-bending and roll round in the same equipment.
Technical parameters:

model	max. rolling thickness mm	max. pre-rolling thickness mm	plate width mm	diameter of upper roller m/min	main motor power kw
W12NC-10× 2000	10	9	2000	240	7.5
W12NC-12× 2500	12	11	2500	280	11
W12NC-16× 2500	16	13	2500	310	15
W12NC-20× 2000	20	16	2000	300	15
W12NC-20× 2500	20	18	2500	360	22
W12NC-25× 2000	25	20	2000	350	22
W12NC-25× 2500	25	20	2500	400	37
W12NC-30× 2000	30	25	2000	300	37
W12NC-30× 2500	30	25	2500	400	37
W12NC-30× 3000	30	25	3000	470	45
W12NC-40× 3000	40	32	3000	550	55
W12NC-50× 3000	50	40	3000	610	55
W12NC-60× 3000	60	50	3000	670	75
W12NC-70× 3000	70	60	3000	730	75
W12NC-80× 3000	80	65	3000	780	90
W12NC-90× 3000	90	75	3000	820	90
W12NC-100× 3000	100	80	3000	880	110