Plate Rolling Machine for ship builing industry

Performance and features:
W11TNC series Marine polishing-edge, mainly used for coiling ship hull, arc plate and suppress bulkhead. According to the customer request, can design into the symmetric and asymmetric type three roll trigger on Thomas, Thomas upside sets on rigid beam with girders, Thomas between the lower and lower with multiple Thomas, in order to improve the torre Thomas Thomas and stiffness of the driver. Three Thomas
Marine polishing-edge type can be divided into the following kinds:
A) symmetrical work on modal: Thomas on can do, in terms of vertical lifting movement under Thomas two hardwired work position.
B) the overall level under under Thomas work on modal: Thomas vertical lifting movement, the overall level work under direction of Thomas translation movement.
C) respectively under seven-tone scales: Thomas work on level of vertical lifting movement, Thomas work under horizontal direction Thomas translation movement respectively.
D) work on Thomas universal type: Thomas vertical lifting movement in horizontal direction, but also work under translation movement, two relatively unchanged Thomas position.
Technical parameters:

Model	Max. Thickness of coiled plate mm	Max. Width of coiled plate mm	yielding limit of sheet metal mm	coiling speed m/min	Min. Full load Dia. of coiled plate mm
W11- 20× 8000	20	8000	360	4	5000
W11- 25× 10000	25	10000	235	4	6000
W11- 20× 10000	20	10000	235	4	R500
W11- 25× 12000	25	12000	235	4	10000
W11- 20× 12500	20	12500	235	4	R500