60W Single Output Switching Power Supply S-60
1) Features:
- Universal AC input / Full range
- Protections: Short circuit / Overload / Over voltage
- Cooling by free air convection
- 100% full load burn-in test
- Fixed switching frequency at 77KHz
- 1 year warranty
2) 60W Single Output Switching Power Supply S-60 Specification:
| MODEL | S-60-5 | S-60-12 | S-60-15 | S-60-24 |
| DC VOLTAGE | 5V | 12V | 15V | 24V |
| RATED CURRENT | 12A | 5A | 4A | 2.5A |
| CURRENT RANGE | 0 ~ 12A | 0 ~ 5A | 0 ~ 4A | 0 ~ 2.5A |
| RATED POWER | 60W | 60W | 60W | 60W |
| RIPPLE & NOISE (max. ) Note. 2 | 120mVp-p | 120mVp-p | 150mVp-p | 150mVp-p |
| VOLTAGE ADJ. RANGE | 4.75 ~ 5.5V | 10.8 ~ 13.2V | 13.5 ~ 16.5V | 21.6 ~ 26.4V |
| VOLTAGE TOLERANCE Note. 3 | ± 2.0% | ± 1.0% | ± 1.0% | ± 1.0% |
| LINE REGULATION | ± 0.5% | ± 0.5% | ± 0.5% | ± 0.5% |
| LOAD REGULATION | ± 1.0% | ± 0.5% | ± 0.5% | ± 0.5% |
| SETUP, RISE TIME | 300ms, 50ms, /230VAC 800ms, 50ms/115VAC at full load | |||
| HOLD TIME(Typ. ) | 90ms/230VAC 12ms/115VAC at full load | |||
| VOLTAGE RANGE | 85 ~ 264VAC 120 ~ 370VDC | |||
| FREQUENCY RANGE | 47 ~ 63Hz | |||
| EFFICIENCY (Typ. ) | 73% | 76% | 77% | 79% |
| AC CURRENT | 2A/115VAC 1A/230VAC | |||
| INRUSH CURRENT (max. ) | COLD START 20A/115VAC 40A/230VAC | |||
| LEAKAGE CURRENT | < 3.5mA / 240VAC | |||
| OVERLOAD | 105 ~ 150% rated output power | |||
| Protection type : Hiccup mode, recovers automatically after fault condition is removed. | ||||
| OVER VOLTAGE | 5.75 ~ 6.75V | 13.8 ~ 16.2V | 17.25 ~ 20.25V | 27.6 ~ 32.4V |
| Protection type : Hiccup mode, recovers automatically after fault condition is removed. | ||||
| WORKING TEMP. | -10 ~ +60º C (Refer to output load derating curve) | |||
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |||
| STORAGE TEMP., HUMIDITY | -20 ~ +85º C , 10 ~ 95% RH | |||
| TEMP. COEFFICIENT | ± 0.03%/º C (0 ~ 50º C) | |||
| VIBRATION | 10 ~ 500Hz, 2G 10min. /1cycle, 60min. each along X, Y, Z axes | |||
| SAFETY STANDARDS | Design refer to UL1012, UL1950, TUV EN60950 | |||
| WITHSTAND VOLTAGE | I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | |||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC | |||
| EMI CONDUCTION & RADIATION | Compliance to EN55022 (CISPR22) Class B | |||
| HARMONIC CURRENT | Compliance to EN61000-3-2, -3 | |||
| EMS IMMUNITY | Compliance to EN61000-4-2,3,4,5;6,8,11; ENV50204, EN55024, Light industry level, criteria A | |||
| MTBF | 316.2K hrs min. MIL-HDBK-217F (25º C) | |||
| DIMENSION | 159*97*38mm (L*W*H) | |||
| PACKING | 0.463Kg; 30pcs/15.56Kg/0.0250CBM | |||
|
NOTE: 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25° C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
||||