29V2A is always the staple of my company since our company was founded in 2007, after these years' of research and development in line with the demand of international markets, it has become competitive in both functionality and market prices.
Manual Instruction
1, The one drag one power supply means, ONE power supply combines with the hand controller to power ONE motor (or linear actuator) and its motion.
2, Look the power supply, you can find a Input Connector: 2PIN C8, with the shape of 8 , on the side of the power supply. Besides, two interfaces lays in front of the power supply, one is to connect the hand controller, one is to connect the motor (linear actuator).
3, Then choose the suitable AC cord for the AC socket to power the motor, and the suitable cords for hand controller and motor (linear actuator) to move.
4, Reference the silkscreen image on the hand controller interface and put it into use on power supply and motor, enjoy it...
Technical Parameters
Input requirements:
Input voltage: AC 90~264V; Input frequency:47~63Hz; Input current:1.5A.
Output requirements:
Output voltage: 29V; Output current: DC0~2.0A.
Protection:
Input Over Current protection; Output Over Voltage Protection;Output Current Protection; Output Short Circuit Protection; Over Load Protection.
Efficiency:80%(under typical station).
Outside Dimension: 129.3(L)X70.6(W)X34.6(H)mm(Common size)
140(L)X88(W)X49.5(H)mm(MAX size)