Size M18 ( Shielding shielding not shielding shielding shielding Model E2E - X7D E2E X14MD - - - - - - Z Z E2E - X10D E2E X20MD - - - - - - Z Z 7 mm to 14 mm + / - 10% + 10% detection distance 10 mm + / - 10% 20 mm + / - 10% Set distance * 1 0 ~ 5.6 mm0 ~ 11.2 mm0 mm0 ~ 8 ~ 16 mm Should be differential detection distance is less than 10% Magnetic metal detectable objects (non-magnetic metal detection distance shorter. Please see the "feature data") on the sample Standard testing objects iron 18 x 18 x 1 mm iron 30 * 30 * 1 mm iron 54 * 54 * 1 mm Response frequency * 2 0.5 kHz0.4 kHz0.1 kHz Power supply voltage (using the voltage range) DC12 ~ 24 v ripple (p - p) below 10% (DC10 ~ 30 v) Leakage current 0.8 mA Control the output switch Capacity of 3 ~ 100 ma, diagnostic output 50 ma [(only for D1 type (5) S] residual Under voltage 3 v * 3 (when load current is 100 ma, cable 2 m long, only M1J - T for the below 5 v) Lamp type D1: action (red), set to display (green) D2: action show (red)
The influence of the voltage at the rated supply voltage range of plus or minus 15%, rated supply voltage, the detection distance of plus or minus 1% Insulation resistance more than 50 m Ω (DC500V megger) charging department between the shell and as a whole AC1, withstand voltage 000 v 50/60 hz 1 min charge between whole and shell Vibration (durability) 10 ~ 55 hz fluctuation amplitude is 1.5 mm 2 h X, Y, Z direction Impact (durable) 1000 m/s2 X, Y, Z direction 10 times each Protection structure type, connector relay type wire is that IP67 IEC standards, internal standard oil company IP67 plug type: IEC standards Connection wire draw out type (standard cable 2 m long), connectors, connectors relay (standard wire length to 300 mm) The quality (after packing) wires Draw out type about 130 g, 175 g connectors About 70 g, 110 g relay type Connector type 40 g 90 g Brass nickel plated surface Test surface of PBT, Tighten nut brass nickel plated Toothed washer galvanized iron Attachment specification