| Place of Origin: | China (Mainland) |
|---|---|
| Brand Name: | Valor |
| Model Number: | Valor004 |
| Application: | Screen |
| Material: | Nickle |
| Wire Gauge: | |
| Mesh Size: | |
| Hole Shape: | Square |
| Surface Treatment: | Galvanized |
| Technique: | Welded |
| Brand name: | Valor |
| Usage: | Liquid Filter |
| Material: | Metal |
| Filter Rating: | 95%~98% |
| Diameter: | 1000-4100mm |
| Thickness: | 100-200mm |
Quick Details
Specifications
TOP.1 Nickle Wire Mesh Demister,Mist Elimitor With Good Resistance To Corrosion
Nickle Wire Mesh Demister, also called Nickle Mesh Demister, remove droplet by impingement on the wire surface. The liquid collected on the filaments is then able to drain from the pad under gravity. They have a limited range of useful operation in which they provide almost complete removal of droplets down to about 3-5 microns. Turndown range of vapor rate is around 3:1. At excessively high vapor velocities, the liquid droplets that impinge on the wire surface are sheared off by the vapor and re-entrained before they are able to drain.
At very low vapor velocities, all but the larger droplets are able to follow the vapor path through the nickel mesh and thus avoid impingement; however the inherent design of the separator vessel means that in most applications an effective turndown performance of 10:1 can be achieved. Nickel wire mesh demisters are well suited to remove mechanically formed entrainment from packed and trayed process towers, spray columns, venture scrubbers and other gas scrubbing devices. They are also a widely used de-entrainment device in knock out drums and separators.
Features:
* Nickel demister pad has good resistance to corrosion in acid and alkali and is most useful under reducing condition. It has outstanding resistance to caustic alkali up to and including the molten state. In acid, alkaline and neutral salt solution, it shows good resistance, but in oxidizing salt solution severe attack will occur.
* It is virtually immune to inter granular attack above 315C, chlorates must be kept to a minimum.
* It has resistance to mineral acid vary according to temperature and concentration and whether the solution is aerated or not. Corrosion resistance is better in de-aerated acid.
* Nickel demister pad has good resistance to corrosion in acid and alkali and is most useful under reducing condition. It has outstanding resistance to caustic alkali up to and including the molten state. In acid, alkaline and neutral salt solution, it shows good resistance, but in oxidizing salt solution severe attack will occur.
* It is virtually immune to inter granular attack above 315C, chlorates must be kept to a minimum.
* It has resistance to mineral acid vary according to temperature and concentration and whether the solution is aerated or not. Corrosion resistance is better in de-aerated acid.
Specifications:
Typical limit drop sizes= 3 microns
Mesh pad velocities= 450fpm
Typical mesh pad pressure drop STP= 0.4" w. c.
Mesh pad + profile mist eliminator velocity= 1100fpm
Typical pressure drop for mesh pad + profile mist eliminator combination 0.6" w. c.
Diameter: 1000-4100mm
Thickness: 100-200mm
Filtration rating: 98%-98.9%
If there is any question , pls no hesitate to contact us ! We will response you as soon as possible !Thanks!