1.pir sensor switch
2.Newest European model
3.120-230VAC /347VAC
4.Auto-on/off
5.Energy-saving

Function
The sensor works fully automatically and is used for contactfree
switching. The values detected by the sensor (motion, light
value) control the switching behavior on the basis of the parameters
set by the user. The measured light value depends on the
incidence of daylight, the artificial lighting and the properties of
the surface (light/dark).
The following parameters can be set:
• Switch-off delay time (if no motion is detected)
• Light value
• Extension switching time
• Function mode

Technical data
Operating voltage 230 V AC/50Hz
Switch output load
capacity
Resistive load: 2300 W
HV halogen lamp: 1500 W
Fluorescent lamps: 1000 VA
Inductive load: 600 VA
Max. number of ECGs:
5x QT-FQ 2x80 or
QTP5 1x80 or
QTP5 2x54
7x QTP5 2x14-35 or
QTP5 1x54
9x QTP5 1x14-35
5x QTP8 2x58
9x QTP8 1x58
5x QT-FIT8 2x58 or
QT-FIT8 2x36
9x QT-FIT8 1x58 or
QT-FIT8 1x36
5x QTi 2x35/49/80
10x QTi 2x28/54
14x QTi 1x28/54
Max. inrush current 80 A (max. 20 ms)
Operating temperature 0 °C … +35 °C
Protection type IP 20
Dimensioned drawing
Upper sensor part
S Support plate, flush-mounted device
Lower sensor