The Split Foot Erection Anchor is designed for horizontal to vertical edge lifting and handling of thin-walled precast elements. The two “ears” on the head of the anchor prevent the Clutch from coming in contact and spalling the concrete. The “ears” transfer the shear loads into the anchor and concrete. The shear bar is required with this anchor. A tension bar may be required to reach the higher tension capacities. Available in 2T, 4T and 8-Ton capacities. Standard Finish: Hot-Dipped Galvanized. Shear Plate available
Artical:Erection Anchor
Length:230mm
Material:ST52-3
Finished:H.D.G
Length:230mm
Material:ST52-3
Finished:H.D.G
| Load group 2.5t(0.7t-2.5t) | ||||
| Designation | a(mm) | c(mm) | d(mm) | g(mm) |
| 1.4-20 | 55 | 6 | 200 | 45 |
| 2.5-23 | 55 | 10 | 230 | 45 |
| Load group 5.0t(3.0t-5.0t) | ||||
| Designation | a(mm) | c(mm) | d(mm) | g(mm) |
| 4.0-27 | 70 | 12 | 270 | 70 |
| 5.0-29 | 70 | 15 | 290 | 70 |
| Load group 5.0t(5.3t-10.0t) | ||||
| Designation | a(mm) | c(mm) | d(mm) | g(mm) |
| 7.5-32 | 95 | 15 | 320 | 90 |
| 10-39 | 95 | 20 | 390 | 90 |
| Load group 26.0t(12.5t-26t) | ||||
| Designation | a(mm) | c(mm) | d(mm0 | g(mm) |
| 12.5-50 | 148 | 20 | 500 | 90 |
| 17.0-59 | 148 | 25 | 500 | 90 |
| 22.0-50 | 148 | 30 | 500 | 90 |