Stone Crusher-jaw crusher

 

Advantages:

1, large crushing ratio, uniform particle size.
2, easy to replace parts, maintenance, small amount of work.
3, simple structure, reliable operation and low cost .
4, low noise, less dust.
5, nesting population adjustment range, can meet different user requirements;

 

Product Description:

PE Jaw Crusher is our company set the successful experience in similar products at
home and abroad, for mining, smelting, building material, highway, railway, water
conservancy, road construction and other industrial sectors quarries and rock crusher
specially designed. The product specification is complete, the feed size from 80-850
mm, PE-type jaw crusher crushing materials of compressive strength of up to 300Mpa,
is a complete set of broken lines in the first choice of primary crushing equipment.

 

Working principle of Stone Crusher:

The motor transmits power through belt, drives the moving jaw to do periodic motion
towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving
jaw plate increases when moving jaw moves. So the moving jaw moves towards the fixed
jaw. The stuff will be crushed in this process. The angle between toggle plate and moving
jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by
pulling rod and spring, the final crushed stuff will be discharged from the outlet.

 

Jaw Crusher Note:

The aircraft should be checked before use each part of fasteners, particularly bolts
lubricated parts and ministries, all lubricated parts need to maintain sufficient oil, will be
fastening bolts loose, and then clean up broken cavity residue, and then start production
of in normal work, note that even under the material may not be under a foot, for a long
time without adding, too much can cause mechanical blockage. Jaw movement and
static jaw plates, side panels, roof of wearing parts, taking care to maintain!

 

Main Technology Parameter: