2400mm Multi-Dryer and Multi-cylinder mould Kraft Paper Machine
Technicial parameter:
|
Output paper
|
kraft paper
|
|
Output weight
|
100-250g/m2
|
|
Paper width
|
2400mm
|
|
Wire width
|
2850mm
|
|
Design speed
|
150m/min
|
|
Capacity
|
25-30 T/D
|
|
The gauge
|
3200mm
|
|
Pressure type
|
pneumatic pressure device
|
|
Driving type
|
use AC frequency conversion, and driving by step
|
Description:
The cylinder part: Φ 1500mm×2850mm 4 stainless steel mesh cylinder mould, material: s.s.304, Φ 500mm×2850mm 5 couch rolls (including 1 returning roll), shore harness 38°±2, pneumatic compression device, equipped with turning roll device, and attached with 4 pressure mould former(made of polyethylene board).
The press part: the main press 2, double, Φ 650mm×2850mm 2stone rolls, Φ 600mm×2850mm 2 rubber rolls; shore hardness 95°±2, and pneumatic compression device(standard height and moderate rubber roll)
The dryer part: Φ 2500mm×2850mm 2 dryer cans,Φ 1500mm×2850mm 9 dryer cans. arrangment pattern (1+1+3+sizing machine+6), and pneumatic compression device. equipped with pneumatic guide and electric mesh-fastener.
winding part: 2400mm cylinder winding paper machine and 2400mm rewinding machine.
Driving and controlling part: using of AC frequency conversion, and driving by step.
Paper making, pulping and auxiliary equipment:
|
2400mm multi-dryer cylinder and multi-wire paper machine
|
1 set
|
|
Exhausting hood
|
3 sets
|
|
Flow fan
|
2sets
|
|
SL-4G vacuum pump
|
1set
|
|
Suction box
|
4sets
|
|
Pressure mould former
|
4sets
|
|
2400mm winding machine
|
1set
|
|
2400mm sizing machine
|
1set
|
|
Paper transducer
|
1set
|
|
Total workbench , ladder, handrail
|
whole sets
|
|
5 m3 water pulp shredder
|
2 sets
|
|
2m2 shaking screen
|
2 sets
|
|
Pressure-flow within sieve
|
2 sets
|
|
380 double pulping machine
|
3sets
|
|
Φ700 thruster
|
4 sets
|
|
Pulp-150
|
6 sets
|
|
Pulp-200
|
4 sets
|
|
606 desander 20sets
|
2 groups
|
|
4T boiler
|
1set
|
|
2400mm rewinding machine
|
1set
|