1. Adopting the vacuum forming ceramic fiber material as the inner layer of the furnace chamber, with characteristics of low thermal conductivity, light weight, good gather heat effect, fast heating, small consumption at empty furnace, saving energy 50%.

 

2. Can use the technology of heating-up at four sides or five sides, the uniformity of chamber is good, the sintered samples can be heated evenly, with high firing rate.

 

3. the furnace door can make translation,.Electric lift or double opening door.

 

4. It can be programmed 30-50segments to meet the needs of continuous temperature control and constant temperature, with the function of PID setting automatically.

 

5. Manual/automatic switch without any interference, give an alarm if exceeding the preset temperature value

 

6. User can use temperature recorder, which can record the rising curves and history data.

 

7. Observation window, chimney, furnace bottom plate and sintering fixtureare all optional.

 

8. Modularize design of control system, long life design technology, the quality is reliable and good.

 

9. Box type furnace, annealing furnace, car bottom furnace, push furnace and mesh belt furnace are all optional.