small hammer crusher / hard stone hammer crusher / small size hammer crusher

Introduction to the Single stage Hammer Crusher:

Hammer Crusher is widely used for medium or fine crushing for medium hard and brittle materials by departments of mine, cement, coal, building material, metallurgy, chemical industry, road construction, gas chemical industry and thermal power generation, etc. Coal gangue, coke, slag, limestone, phosphate rock, salt, whiting, gypsum stains, alum, brick and tile, etc. can be crushed by this equipment. The compression strength of the materials shall not exceed 100MPa, while the moisture content shall be lower than 15%. The equipment can be also used for crushing chips and paper with fiber structure and strong elasticity and ductility, or recycling asbestos fiber by crushing wastes of asbestos cement, etc. Gap between the gratings are adjustable to change grain size of the discharge, so as to meet different requirements of the customers.

Advantages of Single Stage Hammer Crusher:

High quality chrome hammer, abrasion resistance achieving the advanced        level in country ;

Specially designing tooth impact plate;

Adjustable discharge open;

High efficiency;

 Low power consumption unit;

  Runs Smoothly. 

Main Technical Parameters of Hammer crusher:

Model	Max feed size(mm)	Rotor diameter(mm)	Rotor length(mm)	Discharging size inexactitude ratio≤15%	Capacity(t/h)	Motor power (kw)	Weight(t)
PCF-1412	600×600×900	1420	1200	≤25	80-120	220	23.5
PCF-1616	800×800×1000	1650	1630	≤25	180-220	315-355	43.3
PCF-1618	≤1m3	1650	1830	≤25	240-280	400	49.5
PCF-1818	900×900×1000	1850	1830	≤25	300-350	560	70
PCF-2018	≤1m3	2020	1802	≤25	350-500	630-710	89
PCF-2022	1000×1000×1500	2010	2230	≤30	600-800	800	111
PCF-2022Ⅱ	1000×1000×1500	2010	2230	≤70	600-800	800	130
2PCF-1818	1000×1200×1500	1850	1830	≤75	1000	560	119
2PCF-2030	1000×1000×1500	2020	2230	≤25	700-900	800×2	142

>142