13.56MHz IC Access Control Reader 

Specification 

*Less than 0.2 second Response Speed 
*Less than 0.5 seconds Proximity Time Distance: 
*5-10cm Proximity Range 
*Support Mifare 1 Card (13.56 MHz Frequency) 
*-25C to 75C Ambient Temperature, 10%-90% Ambient Humidity 
*Built-in Antenna 
*Built-in LED (Double Color LED) 
*Built-in Loud Speaker (Buzzer) 
*DC 12V Working Voltage, 70mA Working Current 
*100 Meters Communication Distance 
*Real Time Data Transfer 
*Black Color 
*PVC Case Material (Black Resin for Water-Proof Function) 
*120mm*76mm*25mm 

Installation 
Using + screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws. 

Wire Connection 
Red DC 5V-16V 
Black GND 
Blue D1 
White D0 
Brown BEEP 
Green LED 
Yellow Alarm 

Notice 
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply 
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND 
3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires