Weigand 26 ID/IC Access Control Reader

Specification 
Size: L115mm*W75mm*H21mm
DC 5V-16V Working Voltage 
Less than 80mA Static Current 
5~10CM Reading Range 
Support EM-ID Card or MIFARE 1 Card 
0º C to 70º C Ambient Temperature 
10% to 90% Ambient Humidity 
International Standard Wiegand 26 Interface 
More than 100M Communication Distance 

Installation 

Using "+"type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws. 

Wire Connection 
Red DC 5V-16V 
Black GND 
Blue D1 
White D0 
Brown BEEP 
Green LED 
Yellow Alarm 

Notice! 
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply 
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND 
3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires