working prinpicle:

1. Aerial turnover crane brings the green cake in to sky, turnover 90 degrees, puts it onto the cutting car, cuts the base body with side panel which is powered by electric and walk to stay, finish cuts vertically.
2. Cutting car continues moving after the central position of the crosscut device stops, the crosscut device is started, crosscut shelf cuts the block from top to bottom in vertical cutting.
3. Cutting car walks to organize into groups. The hanger hangs the green cake, and raise up out of curing car, cutting car returns to primitive position to carry on the next cutting circulation.

Technical Parameter

Serial No.	Item	Unit	Target	Remark
1	Production Capacity	M3/Year	5-15	Annual
2	Size	M	4.0×1.2×0.6	Net
3	Number of Mould	mm	5/10	Vertical  cutting/ crosscut
4	Cutting Precision	mm	±2±1±1	Length Wide/Height
5	Product Cycle	min/Mould	5
6	Weight	t	22
7	Electric Capacitance	kw	18	Vertical  cutting/ crosscut /Hydraulic

Features

1. The machine structure is simple and practical, the maintenance is easy;
2. The green cake is sideward, so the width of the whole green cake is 600mm, and the height is 1200mm. Steel wires for cutting is short, which is also difficult to rupture and float. It is high in cutting precision;
3. The vertical cutting device is fixed. Crosscut device cuts the green cake vertically by steel wires. It shortens the cutting steel wires length, guarantee precision of cutting;
4. This machine cuts the green cake in Hexahedron-type, so the products quality wont be influenced by the distortion of the mould;
5. Cylinder Tension, which supply gas to each wire respectively;
6. Avoiding the wires being stretched off by using a special device;
7. Life of the wire can extend (Usually 10 days, Now 20 days);
8. Operating it in use of the computer touch panel, realize separation of Man-Machine.