We produce four type of sintered wire mesh, can be used in different industries.

 

Type A: This is a standard combination of 5-layer sintered wire mesh which has the widest application. Five different layers of stainless steel wire mesh are combined, and then sintered together through vacuum sintering, compressing, and rolling, forming a porous product

 

Type B :This type of mesh is sintered together by many layers of plain-woven square mesh. Owing to the large opening ratio, the sintered mesh possesses good permeability, small resistance but large flow. It is mainly applied to filter kinds of air and liquid. It can be made according to the customer,s request because every layer of mesh is alternative

 

Type C :It is sintered by punching plate and multi-layer stainless steel wire mesh. Due to the support of punching plate, it has the higher compressive and mechanical strength. It is mainly used in food, beverage, water treatment, dust removing, pharmaceutical, polymer, etc. It can be processed into various filters: tube, disc and sheet. The thickness of the punching plate and the structure of the wire mesh can be customized according to the user,s requirements

 

Type D : Type D sintered laminate is overlapped and stacked up by 2 or 3 layers of plain dutch woven wire mesh with equal hole size, after vacuum sintering, pressurizing and rolling. It has the average pore size and steady air permeability. This kind of material can be widely used in powder transport, laboratory fluid bed, driers and coolers