| name: | nail dust collector / dust collector price / cyclone dust collector |
|---|---|
| color: | Different color as client required |
| Installation: | Under our engineer's guide |
| price: | negotiable |
| packing method: | adjustable |
Quick Details
Specifications
nail dust collector / dust collector price / cyclone dust collector
Principle of operation:
Principle of operation:
After dust-laden air enters the dust collector, due to sudden expanding airflow end and the role of air distribution plate, some of the large particle falls intohopper because of gravity and inertia; other small and tiny particle comes intofiltering chamber, then deposits on media' s outer surfaces because of brownianmotion and fiber interception.
The clean air emerges into the cleaned air chamber and from there it is discharged. The resisstance of dust collector increases in accordance with expanding of dust concentration. When reaching a setpoint, the pulse valve of cleaning system jets a high speed& pressure airflow to clean the sut. That time PLC controls the open& close of the pulse valve.
While opening, the compressed air in packet enters theinner of filter cartridge equably, creates immediate pressure and great surge, and dislodges the dust layer falling into container.
Specification:
Specification:
1. Applied advanced downflow design and cartridge horizotal insertable layout, in this way dust collector shows good performance in dust cleaning job.
2. Dust baffle plate setup in the dust-laden air intake, in the role of cushion and durable layer, approaches-avoidance of high speed impact to filter cartridge, thereby extend the life of them.
4. Modular portfolio, the size of dust collector could be optional to cusotmers' requirement.
Performance Features:
Technical Parameter :
3. Cartridegs 15 C tilt drawer-style installation, enables more convenient remove. And no setup of transmission parts inside the dust collector, which meansmaxmimum cutting of maintenance cost. In terms of general dust, there can be noreplacement of filter cartridges for a lone time, in the case of saving burdensome work of frequently changing comparing with filter bags, and also a huge reduction of maintance costs.
4. Modular portfolio, the size of dust collector could be optional to cusotmers' requirement.
5. The size could be expaned on basis of existing portfolio by increasing dust removal unit, without many changes of original equipment.
Performance Features:
1. It uses full set of computerized design and the design is correct & reliable.
2. The casing uses framework structure with high intensity and good stability, it can be designed according to different pressure and temperature resistant requirements.
3. Gas inlet & outlet type can be designed into various kinds of forms according to technical arrangement and flue gas characteristics, the technical arrangement is flexible and changeable.
4. It uses flow resistance plus flow guidance type gas flow distribution equipment, therefore it has good gas flow evenness without dust blockage.
5. The discharge electrode is properly connected with the frame without wire dropping and breakage.
6. It uses hammer type rapping with lateral arm, the rapping strength transmission is even with good effect, therefore, it is easy to clean the dust.
Technical Parameter :
|
Model
|
Cartridge Qty
|
Ait Velocity
|
Filtering area
|
Air volume
|
|
HR3-12
|
12
|
0.4-0.8 m/min
|
180 M2
|
4500-9000
|
|
HR4-16
|
16
|
0.4-0.8 m/min
|
240 M2
|
6000-12000
|
|
HR3-24
|
24
|
0.4-0.8 m/min
|
360 M2
|
9000-18000
|
|
HR4-32
|
32
|
0.4-0.8 m/min
|
480 M2
|
12000-24000
|
|
HR4-48
|
48
|
0.4-0.8 m/min
|
720 M2
|
18000-36000
|
|
HR4-64
|
64
|
0.4-0.8 m/min
|
960 M2
|
24000-48000
|