13X molecular sieve, also called Natrium X molecular sieve, Zeolite 13X, is a kind of alkali metal silicon aluminate, its skeleton structure composed of silica and alumina tetrahedral FAU, main crystal holes are twelve ring structures. To the X type molecular sieve, if silicon aluminum ratio is not the same, crystal structures are different. 13X molecular sieve silicon aluminum ratio≈2.6-3.0 (SiO2/AL2O3≈2.6-3.0), aperture 10A, it can adsorb any molecules which critical diameter is greater than 3.64A and less than 10A, as long as the molecules can be adsorbed by 3A, 4A, 5A type molecular sieves, they also can be adsorbed by 13X molecular sieves. Furthermore, 13X molecular sieve can adsorb bigger critical diameter molecules, such as aromatic hydrocarbons and branched chain hydrocarbons.

Yuanying 13X molecular sieve has excellent adsorption performance, high mechanical strength, large specific surface areas and big pore volume, can be widely used in industry, for example, purifying the gas in the air separation device, removal of H2O, CO2 and hydrocarbons; natural gas, liquefied petroleum gas, liquid alkanes (propane, butane) dehydration and desulphurization (removal of H2S and thiol); general gas (such as compressed air, permanent gases) depth drying; ammonia synthesis gas drying and purifying; aerosol, propellant desulfurization and deodorization; pyrolysis gas removal of CO2; catalyst carrier; water and carbon dioxide coadsorption; water and hydrogen sulfide gas coadsorption etc..

3A, 4A, 5A, 10X, 13X molecular sieves can be regenerated by the method of heating with purging or evacuation.

1. Moisture removal: Normally 150~320℃ dry gas such as nitrogen, air, hydrogen, saturated hydrocarbon under 0.3~0.5kg/cm through molecular sieve bed layer 3-4 hours, then filled with cold dry gas to the adsorber about 2-3 hours, isolated from the air and cooling to room temperature;

2. Removing organic matter: Used vapour instead of organic matter, then repeat step 1. Also can be regenerated by 200-350℃through hot vapour or inert gases;

3. Removal of gas substances: by the way of decompression.

On room temperature, relative humidity not more than 90%; not lay bare in the air; keep away from water, acid and soda.

On room temperature, relative humidity not more than 90%; not lay bare in the air; keep away from water, acid and soda