| Colour: | blue,red,yellow,etc |
|---|---|
| Highest inlet air temperature (℃): | 850 |
| Lifting blade form: | Up - lift |
| Shell obllqulty: | 3-5% |
| Shell cubage (m3): | 20.27-69.15 |
| Shell length (m): | 15-25 |
| diameter of inner: | 500-800 |
| nside diameter of outer: | 1500-2200 |
| Speed ratio: | 16.46-41.52 |
| Price: | Resonable and negotiable |
Quick Details
Specifications
Description:
Equipped with Spreading plate, cylinder support the two roller by tyre, the gear wheel used to prevent the cylinder axial movement, the reducer drive big gear and small gear motor, and the big gear is fixed on the cylinder, the windshield prevent the cold air into the body and the combustion chamber. Wet material with hot gas to feed the enter, in cylinder body lift up the lift plate material, make it through the heat flow and drying. Our dryer can be made according to different drying materials for the external heating and within heating. The external heating drying of charcoal, lees, coconut trees leather materials. In heating can be drying slime, sand, slag, chicken manure, cow dung and so on. Heat can use coal, gas occurrence furnace, hot air stove, gas, electric furnace.
Technical Advantage:
Our dryer adopts new Spreading plate device, which has guidance, flow, material functions, it can make the material content in the dryer radial cross section to full uniform, material will become thin and all, the state of the heat flow entirely, to achieve the purpose of make full use of the heat. Our dryer choose reasonable operating parameters, coal consumption and power consumption of general baked dry machine more than 10-15%, one machine yields above 10-15%, it has been widely used. in the cement and mineral processing enterprise.
Operating principle:
Dryer heat from the combustion device, the dryer adopts whatever in heating mode. Therefore need to dry the material from feeding, the feeding slipped into the cylinder, it is spiral copy board.On the one hand the dryer tilt put material on the gravity and return flows back end, on the other hand the material being copy board over and over again, brought to the top and lift it down constantly, make the material inside the tube forming uniform curtain, and the heat flow into the line of heat exchange in the cylinder fully, because of the material and Spreading plate, contains the moisture of being drying, thus attaining the purpose of drying.
Specification:
|
Main motor
|
Main engine rate
|
|||||
|
Power (KW)
|
Model
|
Model
|
speed ratio
|
|||
|
Ö1.2×10m
|
2.5
|
7.5
|
Y160M-R3
|
Zl50-16-I
|
--
|
13.5
|
|
Ö1.5×12m
|
3.3-4.9
|
10
|
Y160L-6-B3
|
JZQ500-III-2F
|
--
|
18.9
|
|
Ö1.5×15m
|
4-6
|
18.5
|
Y200L1-6
|
JZQ500-III-2F
|
--
|
21
|
|
Ö1.8×12m
|
4-6
|
18.5
|
Y160L-6
|
ZQ50-16II-2
|
16.46
|
23
|
|
Ö2.2×12m
|
7.12
|
18.5
|
Y200L7-6
|
JZQ650-III
|
31.5
|
38
|
|
Ö2.2×14m
|
7.12
|
22
|
Y200L7-6
|
JZQ650-III
|
31.5
|
40
|
|
Ö2.2×16m
|
12
|
30
|
Y225M-6
|
JZQ750-III
|
31.5
|
45
|
|
Ö2.4×14m
|
12
|
30
|
Y250M-6
|
JZQ750-III
|
31.5
|
51
|
|
Ö2.4×18m
|
10-13
|
37
|
Y250M-6
|
ZL85-13-I
|
27.16
|
54
|
|
Ö2.4×20m
|
10-14
|
37
|
Y250M-6
|
ZL85-13-I
|
27.16
|
55
|
|
Ö3×20m
|
25
|
55
|
Y250M-4
|
ZL100-16-I
|
41.52
|
78
|
|
Ö3×25m
|
32-36
|
75
|
YR280M-4
|
ZL100-16-I
|
41.52
|
105
|
Indirect drying parameters:
|
Model
Tube diameter
×Tube length
|
Inside diameter of outer shell (mm)
|
Inside diameter of inner shell (mm)
|
Shell length (m)
|
Shell cubage (m3)
|
Shell obllqulty
|
Lifting blade form
|
Highest inlet air temperature (°C)
|
Overall dimension
|
|
Ö1.5×15m
Ö1.5×17m
Ö1.5×19m
|
1500
|
500
|
15
17
19
|
20.27
22.97
25.68
|
3-5%
|
Up - lift
|
850
|
16.2×2.7×2.7
18.2×2.7×2.7
20.0×2.9×2.9
|
|
Ö1.8×21m
Ö1.8×23m
Ö1.8×25m
|
1800
|
650
|
21
23
25
|
35.91
39.33
42.75
|
3-5%
|
Up - lift
|
850
|
22.5×2.7×2.7
24.5×2.9×2.9
26.5×2.9×2.9
|
|
Ö2.2×21m
Ö2.2×23m
Ö2.2×25m
|
2200
|
800
|
21
23
25
|
58.10
63.61
69.15
|
3-5%
|
Up - lift
|
850
|
--
|