| material : | |
|---|---|
| cage: | |
| noise level: | |
| precision rating: | |
| sample: | |
| seal type: | |
| brand : |
Quick Details
Specifications
FC202880 rolling mill bearing
Rolling mill bearing
Rolling mill bearing characteristics:
1. The maximum dynamic load rating can be achieved with a limited mounting space;
2. They are applicable for high speed operation;
3. They permit more accurate limiting tolerances;
4. Both inner ring and outer ring assembly (outer ring with a set of rollers) are interchangeable, which is helpful for quick roll replacement;
5. They can only accommodate radial load.
1. The maximum dynamic load rating can be achieved with a limited mounting space;
2. They are applicable for high speed operation;
3. They permit more accurate limiting tolerances;
4. Both inner ring and outer ring assembly (outer ring with a set of rollers) are interchangeable, which is helpful for quick roll replacement;
5. They can only accommodate radial load.
Roller and groove for line contact or repair referrals contact, radial carrying capacity, is designed to withstand heavy load and impact load. Small friction coefficient, suitable for high speed limit speed, close to deep groove ball bearing.
2. But axial movement and can adapt by thermal expansion or installed by the error of shaft and the shell of the relative position of the change, can make free use of the support.
3. The shaft or a hole for processing the demand is higher, bearing outer ring axis after installation to relative skewed kept under strict control, so as to avoid the contact stress concentration.
4. Inner circle or their cups are separable for easy installation, and removal.
5. Stamping steel cage, high-speed bearing or require smooth operation, the use of the bearing entity kept the frame. According to the site and user requirements, also can design and provide with glass fiber reinforced plastic keep frame system.
2. But axial movement and can adapt by thermal expansion or installed by the error of shaft and the shell of the relative position of the change, can make free use of the support.
3. The shaft or a hole for processing the demand is higher, bearing outer ring axis after installation to relative skewed kept under strict control, so as to avoid the contact stress concentration.
4. Inner circle or their cups are separable for easy installation, and removal.
5. Stamping steel cage, high-speed bearing or require smooth operation, the use of the bearing entity kept the frame. According to the site and user requirements, also can design and provide with glass fiber reinforced plastic keep frame system.
Cylindrical roller bearing some kinds of type:
1) Single Row Cylindrical Roller Bearings without inner Ring rib (NU type)
2) Single Row Cylindrical Roller Bearings with single inner ring rib( NJ type)
3) Single Row Cylindrical Roller Bearings with single inner ring rib and loose rib (NUP type)
4) Single Row Cylindrical Roller Bearings without out ring rib ( N type)
5) Single Row Cylindrical Roller Bearings with single inner ring rib and thrust separate ring(NJ+HJ type)
6) Single Row Cylindrical Roller Bearings with single out ring rib (NF type)
7)Double Row Cylindrical Roller Bearings With inner ring rib (NN type)
8) Double Row Cylindrical Roller Bearings with outer ring rib (NNU type)
9) Double Row Cylindrical Roller Bearings with outer ring rib (NNF type)
10)Four Row Cylindrical Roller Bearings (FC,FCD,FCDP types)
Our Product Range:
deep groove ball bearing
Self-aligning ball bearing
Single Row Cylindrical Roller Bearing
Self-aligning roller bearing
Cylindrical Roller Bearing
Angular contact ball bearing
Tapered Roller Bearing
Thrust Ball Bearing
Thrust Roller Bearing
Linear Motion Bearing
Pillow block bearing