Product Main

Quick Details

COLOR: RED BLACK BROWN

Specifications

as top 30  plywood brand,GIGA plywood are all two hot pressing and reuse more than 10 times ,they have passed ISO9001,BV,CE.they are sells well in South Aferica, Australian, America,and enjoy god reputation at home and abroad
 
GIGA was founded in 1997, all of GIGAwaterproof plywood are two times hot press,GIGA film faced plywood is suitable for outside high-end and high-rise construction and bridge construction.It’s large breadth make it able to reduce the quantity of seam and improve the working efficiency of membrane.And it is Mainly used in high-rise buildings, shear wallVertical wall panel and dam, tunnel and overpass, such as Bridges, arch bridge beams .
 
GIGA plywood information
 
film color black/brown/red
core materials poplar  
Glue urea-formaldehyde resin  
phenolic resin  
melamine  
Size(mm) 1220*2440 915*1830
Thickness 12mm 12mm
13mm 13mm
14mm 14mm
15mm 15mm
17mm 16mm
18mm  
Tolerance of thickness
12mm+-0.5mm
15mm+-0.5mm
18mm+-0.5mm
     
     
Usage construction  
Reuse times 10-15  
Surface abrasion 0.04g/100r  
Bonding strength 1.72Mpa/mm2  
Modulus of elastictity 5017Mpa/mm2  
Crack,delaminating NONE  
Edge defects NONE  
Warpage degree <10%  
Payment terms L/C T/T D/P or as you required  
Certificate ISO9001:2000
 
 
plywood characteristic
 
1.standard size:915*1830mm/1220*2440mm
2.thickness:12mm-18mm
3.glue:WBP or melamine gluemade by ourselves without any impurity 
4.melamine plywood can be re-used 10-15times.wbp plywood can be re-used 15-20times .
5.whole piece of poplar cores rather than fragment
6. two times hot pressing procedure by which the surface will be more smooth, flat and bright rather than only one time.
 
 
Mode of use :
  1. carbide saw blade with more than 80 gears should be used to cut the plywood , and about 1 cm above the  plywood  also the rotate-speed should not be less than 4000 per minutes .
  2. if the plywood  is cut to drill hole , then specis\alized edge banding paint should be used along the edge of the whole .
  3. during the machine ,adhesive tape should be used for the joint for horizontal  plywood  , and sponge strip should be used for vertical  plywood  .
  4. we should put a batten below the  plywood  when we mail or drill in case of any crack…
  5. when remove the  plywood  , we should avoid dropping of large area .