heating oil additives for making clean fuel for cooking
Introduction of fuel oil heating oil:
1. The fuel oil or heating oil is mainly composed by methanol, diesel and relevant additives. For example, you could mix methanol with fuel oil additives only or mix methanol with diesel and fuel oil additives.
2. This kind of fuel oil could be applied as fuel for power plant, industrial boilers and other stoves for cooking or heating.
3. Final fuel oil has high quality and combustion value. There is no dark smoke or pungent smell when burning. Thus it is quite environmental friendly.
4. The cost for making this kind fuel oil is quite low. But it has high benefits.
Definition of fuel oil heating oil additives:
This fuel oil additives is used for making different kinds of heating oil for industrial use or commercial use. With it, you could reduce the cost for purchasing diesel.
Technical data of fuel oil heating oil additives:
|
Appearance
|
oil red transparent liquid
|
|
Density
|
0.96-0.98 g per cubic centimeter
|
|
Sulfur content
|
less than 200 ppm
|
|
Freezing point
|
less than 20 Celsius degrees
|
|
Flash point
|
no less than 55 Celsius degrees
|
|
Mechanical impurities
|
none
|
|
Moisture content
|
less than 1%
|
Methods for making fuel oil:
1. Mix methanol with fuel oil additives. You could mix them at any proportion, such as 50% methanol vs 50% fuel oil additives.
2. Only use fuel oil additives as fuel.
3. Mix methanol with fuel oil additives and diesel. Pls ensure that the proportion of fuel oil additives should be 25%. Then you could add methanol and diesel at any proportion. For example: you could mix with 25% fuel oil additives, 60% methanol and 15% diesel.