Product Main

Specifications

Optical line termination,  4 PON card ,1 PON card with 4 SFP PON ports for PON slot ,
  1 Gigabit Ethernet ports, 4Gigabit SFP slots, 1 debugging serial port,1 management Ethernetport , 
internal power, AC200~240V, 486mm(W)*103mm(H)*384mm(D),19'', 1U.
Features:                                                                               
◇ With Twin-star bus 10Gigabit core switch backplane,support non-blocking wire-speed switch, support 1.25G EPON optical fiber access.
◇ 2.5U height, adopt full front-wiring, small size, highcapacity, maximum EPON optical fiber interfaces reach up to 16.
◇ Provide single main control module, single uplink module,single power supply module and 4 service interface modules.
◇ Support AC/DC dual power supply, with backup powercharger and alarm device, support connecting external storage battery directlyto do backup power charging protection.
◇ Support flexible controllable multi-cast, IGMP Proxy/Snoopingand etc.
◇ Support strong VLAN extension functions, includingVLAN Stacking/Trunk/Translation, etc.
◇ Support flexible DBA, uplink/downlink service rate-limited,precision up to 0.2% (Standard requirement<5%).
◇ Adopt multi LLID and IEEE802.1p technologies, providemulti protection QoS service.
Description
OLT-1600 is a miniaturization and modularization GEPONOLT, broadband fiber access system platform, developed by V-Solution. It isfully compliant to IEEE802.3-2005 and Chinese technical requirements ofEthernet Passive Optical Network (EPON). This product supports integratedaccess service, such as broadband surf-netting, IP voice, IPTV, CATV and etc.
Parameter
Equipment components
Item
Full load Qty.
Description
Equipment frame
1
OLT  equipment frame, including 10Gigabit core switch backplane
Main control module (SWA)
1
Hot-swappable  module, integrate 1 FE out of band management port, 1 debugging serial port,  10Gigabit class non-blocking switch
EPON interface   module (EP4)
4
Hot-swappable  4 EPON interfaces modules, compliant with IEEE802.3-2005 EPON technical  standard, support 20km transmission distance (Standard configuration without  optical module)
Uplink interface module(HUP)
1
Hot-swappable  4 GE interfaces module, SFP slot, support 4GE+10GE XFP(Standard configuration  without optical module)
Fans module(FAN16)
1
Hot-swappable  fans module
Power module(PWR)
1
Hot-swappable  power supply module supports 220VAC/48VDC (With UPS charger). Builds dual  power redundant hot backup with dual power supply
                Hardware features
 
Equipment parameters
Dimension
486mm(W)*103mm(H)*384mm(D)
Net weight
5Kg
Power consumption
≤40W
Operating condition
Temperature:0 ~ +55℃,  humidity:10 ~ 90% (non-condensed)
Storing condition
Temperature:-25 ~ +70℃, humidity:10  ~ 90% (non-condensed)
Power supply
DC
36 ~ 75  VDC
AC
176 ~  264 VAC
Equipment interface
Uplink Ethernet  interface
1*10GE(XFP  connector), 4*GE interfaces (GE or SFP connectors)
EPON interface
16*EPON  SFP interfaces
Console debugging  interface
1  interface, compliant with RS232 technical standard
Out-of-band  management interface
1  interface, compliant with 100Base-TX technical standard
Monitor and alarm  interface
1  interface, compliant with RS485 technical standard(Support sub-node monitor )
          Advanced features
 
Switch function
10Gigabit  switch backplane(Switch capability reach up to 60Gbps), non-blocking  wire-speed switch ability
16K MAC  address table, support 2K multicast table, support 4K VLAN(802.1Q)
Up to  1*10GE, 4* uplink GE aggregation(IEEE 802.ad), support maximum 5 aggregation  groups, support port mirroring based on output interface
VLAN
Support  IEEE 802.1Q VLAN, support 4K concurrent  VLAN
Strong  VLAN extension functions, support VLAN Stacking/Trunk/Translation and  flexible QinQ, etc
RSTP
Support  STP, RSTP
IGMP
Support  IGMPv1/v2 protocol, support IGMP Snooping/Proxy, support controllable multicast
QoS and ACL
Support  CAR(Committed Access Rate), flow rate limit granularity is 64Kbps,
Support  priority level remarking based on port ID, MAC address, VLAN, 802.1p,  DiffServ and/or IP ToS priority
Support  flexible queue scheduling algorithm, support port-based and queue-based  configuration simultaneously, support   three queue dispatch strategies, such as SP(Strict Priority),WRR(Weighted  Round Robin) and hybrid mode(SP+WRR)
Provide  illegal frame filter and packet filter that based on sources MAC(Media Access  Control)address, sources IP address, destination IP address, port, etc.
Support  QoS Profile management, allow user draw up QoS service plan
Storm suppression
Support  broadcast, multicast and DLF broadcast storm suppression, suppression based  on setting PPS
Flow control
Support  IEEE 802.3x flow control in Full duplex mode, support backpressure flow  control in half duplex mode
Encryption and security
Support  LLID MAC address bundling, control the registration of ONU. Prevent illegal  ONU deceive
Support  ONU inter-separation control within same EPON network
Support  encrypted start to control configuration
Link test
Support  EPON network link diagnosis by Ping and Link test
Configuration recovery
Support  ONU off line configuration,  auto-configuration  when registered
Management
FTP,Telnet,Console
Support  in/out-of-band management, support SNMPv1/v2, support IEEE802.3ah OAM
Management function
Support equipment  configuration management, performance management, fault management, sources  management, safety management and etc.
Support  ONU remote management, remote mass configuration download, software remote auto-update
Support  ONU offline configuration, auto-configuration when registered
Support  ONU line diagnosis and distance measuring
Redundant backup
Support  AC/DC dual power protection
Applications
◇ Triple-play(GEPON-IP, CATV, VOIP)
◇ FTTx (FTTH, FTTP, FTTB, FTTC)