GENERAL INTRODUCTION:

  

The carbon monoxide alarm is the only battery-operated alarm that includes a backlight digital display feature. This key feature adds an advanced level of protection. The battery operated CO alarm includes multiple mounting options, allowing installation on a wall or tabletop.

 

It will also detect and store concentration CO levels as low as 11 and up to 999 PPM with its peak level memory display. The backlit display helps to see the displayed reading in the dark, and the backlight appears during the peak level cycle. The light will also turn on when the peak level button is pressed. The peak level memory displays the highest CO concentration measured since the last reset. The test/reset button tests CO alarm circuit operation and allows you to immediately silence the alarm. A low battery signal alerts users when the batteries need to be replaced. Includes informative LEDs: green LED for normal operation, red LED for alarm.

 

FEATURES AND SPECIFICATION:

 

1.Design for detecting CO only;        

 

2.Alarm level: 150±80PPM.         

 

3.Cordless or Wired Plug Optional, 

 

4.MCU processing adopted                                                                                                                                                                                     

 

5.CO sensor: Adopt semiconductor sensor.                                                   

 

6.SMT manufacture technology,good stability.                                              

 

7.malfunction auto-check indicator.                                                                                           

 

8.Operating voltage: 85-265V AC;9-volt alkaline backup battery

 

9.Alarm output: Sound&Flash alarm;                       

 

10.Sound level: 70db (within 1 meter),

 

11.execute criterion: EN50291,UL2034.

 

12.Dimension: 118.5*82*43mm