PRODUCT INTRODUCTION:

 

The product is wall mounted gas detector with high stability, It is used for detecting leaking gas. Advanced semiconductor sensor is adopted to ensure high stability and long life. It is convenient for mounting. The product is suitable for the safety of residential house, villas, hotels, markets, boarding house etc.

 

 

MAIN FEATURE: 

 

* High Reliability Sensor

* Auto Reset after Alarm

* MCU Processing Adopted

* Auto Detect Sensor Failture

* Induced GAS/LPG and Natural Gas

* SMT Design, High Stability

 

TECHNIQUE DETAILS:

 

 * Operating voltage:  220V AC 

* Rated power: ≤3W (220V AC power supply)
* Warm-up time: 3-5 minutes
* Alarm level: 10% LEL of Natural gas
* Alarm indicator:  Corresponding Red LED flash 
* Malfunction indicator: Yellow LED on & Beeper long-buzz
* Alarm sound: ≥85dB (within 1 meter)
* Operating temperature: -10 to 50
* Environmental humidity: ≤95% RH (No congelation)
* Installation mode: Wall mounted
* Alarm output: Relay output /sound & flash alarm
* Dimension: 115*72*41mm

* Type Of Gas Sensed : Natural gas, town gas, LPG 

* Can be connected with Valve, Fan (220VAC or 12VDC output are both available

 

Valve description:

 

* Shut-off automatically When it Alarm
* Actuation voltage: DC 9V pulse
* Temperature: -10~60 centigrade
* Reset style: manual reset
* Body material: Brass
* Flux: 25m3/H
* Maximum pressure: 50Kpa
* Medium: air
* Response time: <0.3S

* Connection style: screw thread

 

 

 

TEST:

 

 To test the installed detector while using independently, you can give some gas around in distance of 5cm to the gas convection holes by using un-ignition lighter.

 

Testing frequently may result in reducing the sensitivity of the detector. The alarm density of gas is set according with the criteria of GB15322.2-2005.The Detector will stop alarm and resume to the detecting state while the gas density reduced to lower than the alarm level.