Instruction:
In the Plasma beam cladding technology, plasma power, cladding and alloy powder is the three most important factors to determine the final quality, including component and the ratio of the powder is to decide the final performance, its price is also to promote plasma spraycover technical constraints, therefore, to find a way to apply to a variety of substrates, "broad-spectrum" alloy ceramic powder has been the direction of our public relations. After tireless research and trial and error, we developed both good hardness and toughness, but also widely used for ordinary carbon steel, alloy steel, high manganese steel and other materials commonly used alloy powder, while developed for some special purpose superhard powder, high temperature powder and used to the crusher hammer the anti strong impact powder. Each of the powder product after careful research, trial and error, and strive science, sophisticated, and effective.
Igood metal powder
|
Model
|
Specification
(µm)
|
Alloy system
|
Physical properties
|
Application Notes
|
Application Process
|
|
IGT-1
|
50-250
|
AStainless steel+
|
HRC35-40
|
With wear, corrosion and thermal fatigue resistance performance for the repair and strengthening of the valve sealing surface, hot rolls.
|
Laser, plasma cladding
|
|
IGT-2
|
50-250
|
Cr-Mn-Si-Mo+
|
HRC50-55
|
For moderate impact abrasive wear, chipping wear, erosion and other conditions for the drill pipe, crushing rollers, rolling the roller repair and strengthen
|
Laser, plasma cladding
|
|
IGT-3
|
50-250
|
Cr-B-Si-Ni+
|
HRC59-66
|
Applies to withstand a high degree of wear and moderate impact conditions, applicable to the repair and strengthening of the cutter end of central trough.
|
Laser, plasma cladding
|
|
IGT-5
|
50-250
|
Cr-B-Si-RE+
|
HRC58-65
|
For low stress abrasion conditions, used in repair and strengthening the nose and tail of central trough.
|
Laser, plasma cladding
|
|
IGT-6
|
50-250
|
Cr-B-Si-Mo-Ni-RE+
|
HRC60-68
|
For low stress abrasion conditions, has a high abrasion resistance, used in repair and strengthening the head and tail of central trough
|
Laser, plasma cladding
|
Above models as part of our products, we also can designed according to your demand.