| Solar Panel (6V,2W) | Size | 128mm x 99mm |
| Maximum Power | 2W | |
| Open Circuit Voltage | 6V | |
| Short Circuit Current | 0.33A | |
| Maximum Power Voltage | 7.41V | |
| Maximum Power Current | 0.36A | |
| Rechargeable battery | Type | Ni-MH |
| Voltage | 3.6V | |
| Capacity | 2000mAh | |
| Lamp | Voltage | DC 3V |
| Q'ty of LED | 30 | |
| Wire Lead | 5m with plug | |
| Function | Day/night Sensor | |
| Lighting mode | Constantly | |
| Charging time | 6-8hours | |
| Q'ty of CTN(pcs) | 8pcs | |
| Carton size(cm) | 42cm x 29cm x 35cm | |
| Price ( USD FOB Shanghai): USD | ||
| Terms Of Payment: 30% deposit, 70% balance upon copy of shipping document | ||
| MOQ: Trail oder is welcome, formal order, the MOQ should be 100 pcs | ||
| Delivery Date: 15 - 30 day | ||
| Quotation Validity: 1 month | ||
|
Main characteristics: 1. Material:The body of the cabinet is made of high quality cast aluminium, the thickness of the it is up to 1.0mm, finished with electrostatic powder spraying; the coat is hard and firm, with strong rust resistance. and the surface uses the frosted paint 2.Use the microprocessor and special control algorithm, realize the intelligent control. 3. Discharge rate with revision control and different discharge rate has different final voltage, in line with the inherent characteristics of storage battery. 4. Charge circuits adopt double MOS tandem control circuit, reducing nearly half circuit voltage losses than diode circuit .PWM fuzzy control is applied in the charging, substantially increasing charge efficiency and using time. 5.It has over charge,over-discharge,overload,unique,electronic short circut protection and protection against reverse polarity. It has TVS lightning protection,no jump line design to improve system reliability and durability. 6. USB output overload protecting: The USB output would shut down automatically as the maximum output current exceeds 1.35A when charging for mobiles, MP3\MP4, and digital camera etc. 7. Charge and discharge independently: discharging could make happen when charging, both of them are not interfered. 8. Charging display function:charging indicator light will flash green light when charging is in progress,and it turns green continuous when the battery fully charged. LED visually displays the status of batteries (25%,50%,75%,100%). 9. All controls adopt industrial chip and precision components, can work normally in cold,high temperature, moisture condition. 10.LED visually displays the status of batteries (25%,50%,75%,100%), when the battery power is less than 25%, LED blink, which reminds users must charge at this time, to protect the battery life. 11. The main circuit of this system makes the high performance, high precision 20 digit AD monolithic processor as major controller |