additives for diesel, could be used for making methanol diesel fuel
Introduction of methanol diesel:
1. Methanol diesel is a newly developed fuel oil for motor vehicles. It is composed by methanol, diesel and relevant additives.
2. This kind of fuel has high power, because the additives we offered could increase the thermal efficiency of diesel. You could also use this kind fuel under cold conditions, cause the freezing point of it is reduced.
3. When you using this kind diesel, the emissions would be greatly reduced. Thus it is a quite environment friendly product. Also it could be stored for more than 3 months if the water included does not exceed the relevant standard under ambient temperature.
4. Methanol diesel could be used whether separately or mix with other fuel oil.
Definition of our methanol diesel additives:
Our additives is the auxiliary agents for mixing methanol with diesel equably. It is quite essential during the process of making methanol diesel. The thermal efficiency of methanol diesel would be easily improved.
Technical data of methanol diesel additives:
|
Appearance
|
light yellow transparent liquid without any smell
|
|
Density
|
0.86-0.88 g per cubic centimeter
|
|
Sulfur content
|
less than 10 ppm
|
|
Freezing point
|
less than -5 Celsius degrees
|
|
Flash point
|
no less than 50 Celsius degrees
|
|
Mechanical impurities
|
none
|
|
Moisture content
|
less than 1%
|
Steps for making methanol diesel:
1. Firstly take 20% of methanol together with 20% of Tiande brand methanol diesel additives according to volumetric weight. And then get them evenly mixed until you get clear and transparent semifinal product denatured methanol;
2. Then put 40% of denatured methanol into 60% of diesel according to volumetric weight. Blend the mixture evenly until it turns into clear and transparent finished product methanol diesel.