1. Besides the basic characteristics of common spot welding machine, the lower welding electrode was designed as flat desk: welding range increase, the welded work piece stays very flat, not deformed.
2. The up welding electrode is designed as Multi-joint arm, welding easily, with out moving work piece, only move the welding gun, can weld any position in the range of the down flat table.
3. At the same time in the 200mm range the lower welding flat table can go up and down freely, by this way it is suitable for welding various shape and size of products.
4. Easily operating and freely, safe and reliable.
Main Specification
|
Main Parameters
|
Units
|
Main Models
|
||
|
DNT-50
|
DNT-100
|
DNT-150
|
||
|
Input Voltage
|
V/Hz
|
380V 50/60Hz
|
||
|
Rated Capacity
|
KVA
|
50
|
100
|
150
|
|
Air Source Pressure
|
Mpa
|
0.5
|
||
|
Electrode Force
|
KN
|
2.2
|
||
|
Welding Table Size
|
mm
|
800(W)*1000(L)
|
||
|
Welding Table Height
|
mm
|
|
||
|
Welding Gun Type
|
|
Horizontal Gun or Vertical Gun (Optional)
|
||
|
Welding Gun Length
|
mm
|
395
|
||
|
Duty Cycle
|
%
|
50
|
||
|
Cooling Water
|
L/min
|
4-6
|
||
|
Welding Electrode Tip
|
mm
|
Φ16×50mm (Taper1/10)
|
||
|
Machine Size
|
mm
|
L:1280*W:1000*H:1890
|
||
|
Weight
|
KG
|
850
|
960
|
1100
|