ARM Single Board Computer Specifications
SDRAM Memory
• 64MB SDRAM, 2-piece 4Banks x 4Mbitsx16bits SDRAM
FLASH Storage
• On-board 512K DataFlash (DB45041D)
• On-board 128M*8bits NandFlash (K9F1G08U0B)
• Could change large capacity or industrial chip according to customer's request
PCB Specification & Size
• Using eight floors of PCB high precision process, and has the best electrical properties and anti-jamming performance
• 96 x 90 x 1.5mm
Working Parameters
• Working temperature: -20°C~ 70°C (batch user could customize -40°C~ 85°C)
• Humidity Range: 5%~ 95%, Non-Condensing
Low Power Consumption
• 5V Dc power supply, low power consumption, <1W
Support OS
• Linux2.6.30 + QT2.3
• Windows 5.0, WindowsCE 6.0
PC104 Single Board Computer Software & Technical Support
Linux Software Features
WindowsCE 6.0 Software Features
QY-9263S Mainboard is designed by 8-floor PCB; On-board CPU, SDRAM, NandFlash, DataFLash; with commonly used interfaces, such as TFT-LCD, touch screen, network, SPI, PWM, CAN, timer, matrix keypad, IDE, high-speed USB Host\Device, SD card, RS232\485 serial port, audio, etc.
9263 Single Board Computer MainBoard Specifications
CPU Processor
• ATMEL AT91SAM9263, ARM926EJ-S core
• With DSP expand instructions, JAVA hardware acceleration
• 200MHz
• ATMEL AT91SAM9263, ARM926EJ-S core
• With DSP expand instructions, JAVA hardware acceleration
• 200MHz
SDRAM Memory
• 64MB SDRAM, 2-piece 4Banks x 4Mbitsx16bits SDRAM
FLASH Storage
• On-board 512K DataFlash (DB45041D)
• On-board 128M*8bits NandFlash (K9F1G08U0B)
• Could change large capacity or industrial chip according to customer's request
PCB Specification & Size
• Using eight floors of PCB high precision process, and has the best electrical properties and anti-jamming performance
• 96 x 90 x 1.5mm
Working Parameters
• Working temperature: -20°C~ 70°C (batch user could customize -40°C~ 85°C)
• Humidity Range: 5%~ 95%, Non-Condensing
Low Power Consumption
• 5V Dc power supply, low power consumption, <1W
Support OS
• Linux2.6.30 + QT2.3
• Windows 5.0, WindowsCE 6.0
| No. | Item | Function |
|---|---|---|
| J1 | Writing jumper cap | Write program to control jump line |
| J2 | Audio signal | Audio signal input/output |
| J3 | TFT-LCD, Touch screen | Expand color LCD screen, drive 4-wire resistive touch screen |
| J4 | LCD power spply jump line | LCD power supply 3.3V/5.0V |
| J5 | GPIO interface | Gnenral IO mouth |
| J6 | Serial port | Debugging serial ports and general serial ports |
| J7 | USB Device | Program download, USB communication |
| J8 | USB Host 1&2 | USB 2.0 host application |
| J9 | IDE interface | connect IDE devices |
| J10 | MISC composite interface | SPI, PWM, timer |
| J11 | Power interface | +5V Dc power supply |
| J12(back) | SD card interface | Stable and portable storage application |
| J13 | Ethernet interface | 10M/100M self-adaptive network |
| J14 | PC104 interface | Standard 8bit/16bit PC104 interface, can be stacked |
| J15 | CPLD program download mouth | used to CPLD program download |
| J16 | Reset pin | System reset |
| J17 | IDE device power jump line | 3.3V/5V jump line, support different IDE devices |
| J18 | Matrix keypad interface | 8 x 8 matrix keypad interface, can also used as I/O mouth |
| J19 | CAN interface | CAN 2.0 bus application |
| Cross-compiler | arm-2007q1-10-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2 | arm-linux-gcc 4.2 |
| U-boot | Version: U-boot 1.3.4 | Provided with bootstrap, U-boot source code |
| Support writing into DataFlash or NandFlash start | ||
| Support SAM-BA software with USB writing and TFTP network update | ||
| Linux Kernel | Version: 2.6.30 | |
| RTC driver, save and restore system time after power off | Provided with test program and source code | |
| CAN driver | Provided with test program and source code | |
| Ethernet driver | Provided with test program and source code | |
| Audio driver | Provided with test program and source code | |
| LCD driver, supporting 320*240, 640*480, 800*600, 1024*768 resolution | Provided special LCD with debug service | |
| Touch screen driver, supporting 4-wire resistive screen | Provided with test program and source code | |
| Serial driver | Provided with test program and source code | |
| Buzzer driver | Provided with test program and source code | |
| GPIO driver | Provided with test program and source code | |
| 8*8 matrix keypad driver | Provided with test program and source code | |
| SPI driver | Provided with test program and source code | |
| PWM driver | Provided with test program and source code | |
| PC104 driver | Provided with test program and source code | |
| USB driver, support mouse, keypad, U disk, printer, WiFi, bluetooth, camera, barcode scanning, etc. | Support various USB external devices, provided with debug service | |
| IDE driver | Support various IDE equipment | |
| CF card driver | Support large capacity CF card | |
| SD card driver | Support large capacity SD card storage | |
| File System | Jffs2 file system | Provided with source code |
| QT | QT2.3 development environment | Provided with QT routine |
| PC Development Environment | Provided ubuntu 10.10 development environment and VM7.1.4 virtual machine | Provided with development environment build manual |
| Bootloader | support writing into DataFlash or NandFlash start | Optional |
| support user-defined boot logo | Up to 1024*768 resolution 24 bmp image | |
| BSP Source Code | ||
| BSP Open Source | RTC diver, save and restore system time after power off | Provided with test program and source code |
| Registry saving, support saving registry information when electricity adjusted | Convenient for user to debug | |
| LCD driver, supporting 320*240, 640*480, 800*600, 1024*768 resolution | Provided special LCD with debug service | |
| Touch screen driver, supporting 4-wire resistive screen | Provided with test program and source code | |
| SD card driver, support 2-wire SD card | Biggest support 4G | |
| Audio driver, support audio input/output and MIC input | Provided with test program and source code | |
| Nic driver, 10/100M self-adaptive, can be expanded gigabit nic | Provided with test program and source code | |
| CF card driver | Support large capacity CF card | |
| IDE driver | Support various IDE equipments | |
| Serial driver | Provided with 232, 485 test program and source code | |
| support 8*8 matrix keypad, also can used as GPIO | Provided with test program and source code | |
| USB driver, support mouse, keypad, U disk, printer, WiFi, bluetooth, camera, barcode scanning, etc. | According to user's selection, debug driver | |
| PC Development Environment |
Wince6.0: Provided with supporting VS.NET 2005 development tools, Wince 6.0 plug-in Wince5.0: Provided with supporting EVC development tools, Wince 5.0 plug-in |
Convenient for user to next develop |
Atmel at91sam9263 Single Board Computer(PC104)Technical Support:
• The problems that customer encounter in the process of development on the products
• System cut, according to customer's requirements
• Develop related drivers, according to the demand of customer(another pay)
• Customized development of back plane, according to customer's requirements(another pay)
Order Infomation
• System cut, according to customer's requirements
• Develop related drivers, according to the demand of customer(another pay)
• Customized development of back plane, according to customer's requirements(another pay)
| Item | QY-9263EK | ||
|---|---|---|---|
| Standard accessories | (1)5V/2A power supply (2)cross serial line (3) CD of DVD development (4)1-wire RS232 serial line(a trailer four)(5) 1-wire USB download line (6)Network line ⑺USB expansion line(a trailer two) ⑻Audio expansion line ⑼exquisite packing box | ||
| DVD resources |
Linux
|
Compilers
|
Cross-compiler arm-linux-gcc
|
|
Tool software
|
Supporting terminal, writing, download tools
|
||
|
Device manual
|
Main components' datasheet of back plane
|
||
|
User manual
|
About all development and use
|
||
|
Image file
|
Bootstarp, u-boot, kernal, image file of file system
|
||
|
Test source code
|
Test routines and source codes of all interfaces
|
||
|
System source code
|
Including bootstrap, u-boot, kernel, file system and QT source code
|
||
|
Schematic
|
Back plane's schematic in PDF format
|
||
|
Packaging library
|
Component packaging library of evaluation board
|
||
|
Windows CE
|
Tool software
|
Supporting terminal, writing, download tools, sync software
|
|
|
Device manual
|
Main components' datasheet of back plane
|
||
|
User manual
|
About all development and use
|
||
|
Image file
|
Firstboot, Eboot, NK image file
|
||
|
Test source code
|
Test routines and source codes of all interfaces
|
||
|
BSP package
|
Related BSP board-level supporting package
|
||
|
SDK
|
Related SDK
|
||
|
Schematic
|
Back plane's schematic in PDF format
|
||
|
Packaging library
|
Component packaging library of evaluation board
|
||
|
LCD options
|
4.3' LCD module + 4-wire resistive touch screen +USB cable
|
||
|
5.6' LCD module + 4-wire resistive touch screen +USB cable
|
|||
|
6.4' LCD+ 4-wire resistive touch screen + USB cable + inverter
|
|||
|
7' LCD module + 4-wire resistive touch screen +USB cable
|
|||
|
8' LCD module + 4-wire resistive touch screen +USB cable
|
|||
|
10.4' LCD+ 4-wire resistive touch screen + USB cable + inverter
|
|||
|
Module options
|
TTL to LVDS module
|
||
|
TTL to VGA module
|
|||
|
Sales hotline
|
+86-571-87858811, 87858822
|
||
ARM SBC Application:
• Textile Industry, Numeric Control Industry, Automobile Electronics, Industrial Touch Screen Control System, Robot Vision, Media Deal Wireless Application, Digital Applicance, On-board Equipment, Communication Equipment, Network Terminal, etc.