We are professional bevel gearbox jack, bevel gear jack for 2 ton load, bevel screw jack travel speed, screw jack bevel manufacturers and factory.
bevel gearbox jack, bevel gear jack for 2 ton load, bevel screw jack travel speed, screw jack bevel Features
1. Load capacity 50kN. When full load, drive shafts torque high speed 232Nm, low speed 116Nm.
2. Lift screw diameter 40 mm, pitch 7 mm.
3. High gear ratio 1:1, low gear ratio 2:1.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Difference from worm gear screw jack, driven spindle by spiral bevel gear sets.
6. Manual operated bevel gear jack by handle or hand crank, or electric motor operated bevel gear jack by 3-phase or single phase motor or gear motor.
7. Processing lift screw stroke according to clients needs. Under max. compression load, without guides 385mm stroke, with guides 770mm stroke. Under tension load, max. 2000mm stroke.
8. Lift screw end fittings include top plate, clevis end, plain end and threaded end.
9. Full synchronization bevel gear jack system, doesn't require right angle miter gearbox to transmit torque and power, bevel gear jacks are directly connected by line shaftings and couplings.
bevel gearbox jack, bevel gear jack for 2 ton load, bevel screw jack travel speed, screw jack bevel Features
1. Load capacity 50kN. When full load, drive shafts torque high speed 232Nm, low speed 116Nm.
2. Lift screw diameter 40 mm, pitch 7 mm.
3. High gear ratio 1:1, low gear ratio 2:1.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Difference from worm gear screw jack, driven spindle by spiral bevel gear sets.
6. Manual operated bevel gear jack by handle or hand crank, or electric motor operated bevel gear jack by 3-phase or single phase motor or gear motor.
7. Processing lift screw stroke according to clients needs. Under max. compression load, without guides 385mm stroke, with guides 770mm stroke. Under tension load, max. 2000mm stroke.
8. Lift screw end fittings include top plate, clevis end, plain end and threaded end.
9. Full synchronization bevel gear jack system, doesn't require right angle miter gearbox to transmit torque and power, bevel gear jacks are directly connected by line shaftings and couplings.