10G OEO Converter (3R Repeater) with SFP+ to SFP+ Slots Standalone Media Converter Card Kit

※10G OEO Converter (3R Repeater)

Features:

．Diversified interfaces including SFP+ to SFP+, SFP+ to XFP, XFP to XFP,

．Supports 3R (Re-generation, Re-timing, Re-shaping)

．Fiber mode converter between fiber to fiber 10Gbps equipment, or fiber repeater for long distance transmission

．1310nm /1550nm/CWDM/DWDM Optical Wavelength Conversion.

．OEO for network backbone(SAN, LAN, MAN)

．Support 2U Rack (16 channel) and standalone use

．Support Jumbo Frame

．Transmission rate:9.95Gbps-11.35Gbps

．Support hot plugging

 

 

 

Ordering Information:

FR-OEO-10G-3R10G Optical-Electrical-Optical Converter(3R)SFP+ to SFP+

SFP+ to XFP

XFP to XFP

 

 

 

※10G OEO Converter (3R Repeate

 

 

Features: 
*3R Repeater 
*Support Jumbo Frame 
*Transparent Transport and very low delay 
*Support ITUT prescribed DWDM/CWDM wavelength 
*Support DMI function for SFP+/XFP fiber module 
*Support PRBS31 Pattern Generator and Checker function 
*Support Loopback test function 
*Economic In-band Management function 
*Powerful Network Management function(Web, SNMP, Console) 
*Support hot plugging 
*Support 2U Rack (16 channel) and standalone use 
*Full State LED display 
*Easy installation 

FiberRoad provides 10G Optical-Electrical-Optical Converter(3R) and module cards to apply in the solution of FTTX, CWDM/DWDM, with the speed of 10G. 

Two-port 10G pluggable media converter, supporting a variety of XFP and SFP+ modules allowing network designers to utilize the module to meet their network requirements. Compatible 10G XFP or SFP+ modules including support for the following standards; 10GBase-SR, 10GBase-LR, 10GBase-ER, 10GBase-LRM, and 10GBase-ZR. 

FR-OEO-10G-3R, its Module Card support network management(Web, SNMP, Console) by management card of FR600-R16 2U Rack (16 channel) chassis, allowing users to view system statues, counters, and network statistics. Moreover, it also can be remote managed by management card of 2U Rack when standalone use. 

 

Interface

Port A

SFP+

SFP+

XFP

Port B

SFP+

XFP

XFP

Transmission Speed

10G

10G

10G

Data

Technical Indexes

Function

3R Repeater

Protocols

IEEE802.3ae (10Gbase-SR/LR/ER/ZR/LRM)

Access Type

10G LAN/ 10G WAN

Transmission Distance

SFP+ module: Up to 80Km XFP module: Up to 80Km

Maximum Packet Forwarding Rate

14,880,950/S

Network management information:

•  Card type information •  SFP+ or XFP fiber module detection •  SFP+ or XFP fiber module DMI function (Temperature Voltage ,Optical power ) •  Link status detector •  Enable/Disabled Loopback test function •  Enable/Disable PRBS Generator and checker function •  Rate select (10Gbase-Lan or Wan ) •  Remote card's status monitor (only in pairs )

Power requirement

Rack-mountable : AC 85 ~ 220V OR DC -48V Standalone: AC 220V OR DC -48V Power consumption: ≤6W

Work Environment

Operating Temp: 0~ 50 C Storage Temp: -10~ 70 C Humidity: 5%~90% (non-condensing )

Dimension

Card :11.5mm(W)×78mm(D) Standalone :156mm(W)×128mm(D)×32mm(H)