Interface: | XFP to RJ45 |
---|
Quick Details
Specifications
XFP to RJ45 10g media converter
Fiber optic converter
Key feature:
*support jumbo frame
*transparent transport and very low delay
*support itut prescribed DWDM/CWDM wavelength
*support dmi function for XFP fiber module
*support loopback test function
*economic in-band management function
*powerful network management function(web, snmp, console)
*support hot plugging
*support 2u rack (16 channel) and standalone use
*full state LED display
*easy installation
*UTP cable length detection(only RJ45 interface)
Fiberroad provides 10gbps ethernet media converter between SFP+ to UTP, and XFP to UTP. No matter what kind of media applied for 10gbps ethernet, it used to be the fiber as the media for transmission. 10g ethernet standalone and module cards, brings you the best and simple solution for the ethernet conversion between media of copper wire and fiber, with the speed of 10g.
Fr-10g-mc its module card allows you to cascade multiple fr600-r16 2u rack (16 channel) chassis for managing at the same time.
With various interface:
SFP+ to RJ45
XFP to RJ45
Main applications
*connection between fiber to copper 10gbps ethernet equipment function as fiber-to-copper media converter for long distance transmission
*media converter for network backbone(san, LAN, man)
*can be applied in telecommunication room, R&D laboratory, data center, and etc.
Fiber optic converter
Key feature:
*support jumbo frame
*transparent transport and very low delay
*support itut prescribed DWDM/CWDM wavelength
*support dmi function for XFP fiber module
*support loopback test function
*economic in-band management function
*powerful network management function(web, snmp, console)
*support hot plugging
*support 2u rack (16 channel) and standalone use
*full state LED display
*easy installation
*UTP cable length detection(only RJ45 interface)
Fiberroad provides 10gbps ethernet media converter between SFP+ to UTP, and XFP to UTP. No matter what kind of media applied for 10gbps ethernet, it used to be the fiber as the media for transmission. 10g ethernet standalone and module cards, brings you the best and simple solution for the ethernet conversion between media of copper wire and fiber, with the speed of 10g.
Fr-10g-mc its module card allows you to cascade multiple fr600-r16 2u rack (16 channel) chassis for managing at the same time.
With various interface:
SFP+ to RJ45
XFP to RJ45
Main applications
*connection between fiber to copper 10gbps ethernet equipment function as fiber-to-copper media converter for long distance transmission
*media converter for network backbone(san, LAN, man)
*can be applied in telecommunication room, R&D laboratory, data center, and etc.
Performance Data |
Technical Indexes |
Transmission Speed |
10Gb/s |
Protocols |
IEEE802.3an(10Gbase-T),IEEE802.3ae(10Gbase-SR/LR/ER/ZR) |
Access Type |
10G LAN |
Interface Type |
Type: RJ45 To/From XFP |
Transmission Distance |
XFP module: Up to 80Km 10Gbase-T: 100meters Cat .6a cable |
Maximum Packet Forwarding Rate |
14,880,950/S |
Network management information: |
• Card type information • XFP fiber module detection • XFP fiber module DMI function ( Temperature Voltage Optical power ) • Link status detector • Enable/Disabled Loopback test function • UTP cable length detection ( only RJ45 interface ) • Remote card's status monitor ( only in pairs ) |
power requirement |
Rack-mountable : AC 85 ~ 220V OR DC -48V Standalone: AC 220V OR DC -48V Power consumption: ≤9W |
Work Environment |
Operating Temp: 0~ 50 C Storage Temp: -10~ 70 C Humidity: 5%~90% ( non-condensing ) |
Dimension |
Card : 11.5mm ( W ) × 78mm ( D ) Standalone : 156mm ( W ) × 128mm ( D ) × 32mm ( H ) |