Product Main

Specifications

HSD-YR series Compression Heat Desiccant Air Dryer
                                                                                                                                    
Strong points:                                                                                                                                          
*High efficiency,energy-saving.                                                                                                                                                
* Pressure dew point:-20~-40℃.                                                                                                                                                      
* Purge air≤1.5%.                                                                                                                                         
* Reliable valve to ensure the completion of all the procedures,pro-long the lives of other parts.        
                    
*High performance of the activated alumina,it is equality,intensity,good dew point and less due to emerge,long using life.                                                                                                  
* Unique pipeline design,it’s ensuring the equal distribution of purge air.                                                                                                                                     
* Three stages draining system.                                                                                                                                          
*Low pressure loss.                                                                                                                                        
 
How it works:                                                                                                                                         
The compression heat series dryer using the high heat,high un-saturation air from air compressor to heat the desiccant,it saves not only the power consumption,but also the air consumption compared to the heated purge dryer.The original compressed air goes to the water cooling system after heating,and then enters into the tower to absorb to dried air. We use 1.5% of finished air to purge the heated desiccant,switching between two towers.


Work Condition and Technical Data:
Inlet temperature : 110~150℃
Inlet pressure: 0.6-1.0MPa
Purge air:≤1.5％
Pressure loss: ≤3％
Inlet oil content:≤0.1ppm
Dew point: -40℃~-60℃
Cooling water inlet temperature: ≤32℃
Cooling water inlet pressure:0.2-0.4MPa
Working method:  continuing alternative working beween two towers
Control method:PLC
Purge type:compression heat purge
Working periods:T=4~8h
Installation mode:indoor,non-basement


HSD-YR Series Technical Data:
model capacity weight  (kg) power consumption Imported and exported flange connection dimensions(mm) desiccant weight(kg) cooling water circulation  (Nm³/h)
 Nm³/min scfm length width height
HSD-15YR 15 530 1000  150 DN65 2000 1400 2500 360 6
HSD-18YR 18 640 1200  2000 1500 2800 432 7
HSD-22YR 22 780 1650 2000 1500 3000 480 8
HSD-25YR 25 880 1880 DN80 2300 1800 2800 600 10
HSD-30YR 30 1060 2000 2300 1800 3000 710 12
HSD-35YR 35 1250 2200 DN100 2300 1800 3000 840 13
HSD-40YR 40 1420 2350 2500 1900 2700 960 15
HSD-45YR 45 1590 2500 200 2500 2000 2700 1080 17.3
HSD-50YR 50 1750 2800 2500 2000 2900 1200 19
HSD-60YR 60 2120 3250 DN125 3000 2000 2900 1440 23
HSD-80YR 80 2840 4350 3200 2200 3200 2240 31
HSD-90YR 90 3180 5000 DN150 3500 2200 3200 2520 35
HSD-100YR 100 3500 6500 3900 2200 3200 2950 39
HSD-120YR 120 4240 7800 3900 2200 3500 3446 46
HSD-150YR 150 5300 9700 DN200 4500 2700 3400 4034 58
HSD-180YR 180 3180 12500 4800 2800 3500 6200 68
HSD-200YR 200 7000 13100 250 4800 2800 3800 7190 78
HSD-220YR 220 7770 13700 5100 3000 3700 7820 84
HSD-250YR 250 8750 14500 5300 3100 3600 7880 90
HSD300YR 300 10500 17000 DN250 5800 3400 3900 9860 115