Product Main

Specifications

We supply series of aluminum anode for defend the corrosion of steel structures in seawater. The Performance of the anode will be affected by the chemical composition of the alloy. We adopt high purity Aluminum ingot for the anodes.
The anodes are cast automatically, thus the anode alloy is uniform, free of dust and oxides. We have different alloy series to meet customer's request:
a).YA-I series, AL-Zn-In-Si, Al-Zn-In-Ti alloy Suitable for seawater environment.
b).YA-II series AL-Zn-In-Mg-Ti Alloy
Suitable for seawater environment, specially suitable for where the fresh water and seawater mixed, and have a higher resistance.
Chemical composition


Type
Zn%
In%
Si%
Fe%
Mn%
Cu%
Ti%
Mg%
Al%
Al-Zn-In-Si
2.8-3.5
0.01-0.02
0.08-0.20
0.10max
0.10max
0.005max
 
 
Balance
Al-Zn-In-Ti
2.0-5.0
0.015-0.05
0.01max
0.10max
0.10max
0.005max
0.01-0.05
 
Balance
Al-Zn-In-Mg-Ti
4.0-7.0
0.02-0.05
0.1max
0.15max
 
0.01max
0.01-0.08
0.5-1.5
Balance

Electrochemical properties
Type
Open Voltage(-v)
Closed Voltage(-v)
Capacity A.h/kg
Efficiency
Al-Zn-In-Si
1.05-1.18
1.05-1.12
2500min
90%min
Al-Zn-In-Ti
1.05-1.18
1.05-1.12
2500min
90%min
Al-Zn-In-Mg-Ti
1.10-1.18
1.05-1.12
2600min
92%min

Size specification

2. For ballast tank
The dimension: length x (up width + bottom width) x thickness
* All dimensions and weights shown are nominal. actual dimensions/weight will be adjusted according to drawings.
Type
YA-B01
YA-B02
YA-B03
YA-B04
YA-B05
YA-B06
Dim
1500x(65+75)x70
500x(115+135)x130
500x(110+130)x120
1000x(58.5+78.5)x68
1000x(56+74)x65
1143x(48+54)x51
Weight
21.5kg
23.0kg
20.0kg
13.2kg
10.0kg
9.0kg