Dental Wireless Cordless LED Curing Light Lamp

1.In the developed countries LED light curing machine has become popular in Europe and Americal, it has approved the reliability in  the light curing area. Now there have the wire & wireless light curing machine in China, and it has confirmed the blank of national.

2.This instrument imported LED, blue high brightness sensitive, it can cure the resin which the wavelength of 420-480nm, and used to repair the teeth in the department of stomatology.

3.It use the high capacity lithium ion charging battery, it can be used about 150-200 times when it full of power.

4.It has the intelligent battery check the circuit, when the electric is low, it will alarm and the light will flashing.

Light intensity
2200 mw/cm,5 watt LED

Alert
 The battery's voltage is down and needs recharge

Operation Note
Cord/cordless unchangeable when running out of the battery, the unit can be operated directly with the switching power adapter.

Three Preset Programs  
a. Mode 1: full mode-output with entire power in the whole the process
b. Mode 2: ramp-up mode-output rise gradually from 30% to 100% in the one third treatment, and then lasts in full power in the other two third treatment
c. Mode 3: pulse mode. Output with zero-power and entire power by turns every half seconds
 
Warranty
Fully guaranteed for one year
If the product is not working over 30s, it can automatically turn into the inactive state to save battery
Automatically memorize the latest used working model and time.

Technical specifications
working voltage: 100-240V, AC, 50-60HZ
output power: 5W
size: Diameter 23x155mm
weight: 250g
battery: Lithim Ion, battery capacity: 2200mAh
wave length: 420-480nm
The machine should be used for light curing and whitening.
Whitening function: press the mode 3S to enter the whitening mode, then it will  be flicker, at the same time, the LCD screen show with minute, the time key can  move the time up and down, you can chose the time from 0min to 30min by  yourself, if press the time-key for a long time, the light intensity will be  increase by degrees or descending with 20%.
This led curing light can be supplied with OEM purpose.